
520
User’s Manual U12790EJ2V0UD
CHAPTER 25 ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings (TA = 25
°C)
(Notes are explained on the next page.)
Caution If the rated value of even one of the above parameters is exceeded even momentarily, the quality
of the product may be degraded. The absolute maximum ratings, therefore, are the values
exceeding which the product may be physically damaged. Be sure to use the product with these
ratings never being exceeded.
Remark Unless otherwise specified, the characteristics of alternate-function pins are the same as those of port
pins.
Parameter
Symbol
Conditions
Rating
Unit
Supply voltage
VDD
–0.3 to +6.0
V
VDDPORT
–0.3 to VDD + 0.3Note 1
V
AVDD
–0.3 to VDD + 0.3Note 1
V
VDDPLL
–0.3 to VDD + 0.3Note 1
V
VPP
PD178F098 only, Note 2
–0.3 to +10.5
V
Input voltage
VI
–0.3 to VDD + 0.3
V
Output voltage
VO
Excluding P130 to P137
–0.3 to VDD + 0.3
V
Output breakdown
VBDS
P130 to P137
N-ch open drain
16
V
voltage
Analog input voltage
VAN
P10 to P17
Analog input pin
–0.3 to VDD + 0.3
V
High-level output
IOH
Per pin
–8
mA
current
Total of P00, P01, P20 to P27, P50 to P57,
–15
mA
and P70 to P73
Total of P02 to P07, P30 to P37, P40 to P47,
–15
mA
P60 to P67, P74 to P77, and P120 to P124
Total of P100 to P102
–10
mA
Low-level output
IOL Note 3
Per pin
Peak value
16
mA
current
r.m.s
8
mA
Total of P00, P01, P20 to P27,
Peak value
30
mA
P50 to P57, and P70 to P73
r.m.s
15
mA
Total of P02 to P07, P30 to P37,
Peak value
30
mA
P40 to P47, P60 to P67, P74 to P77,
r.m.s
15
mA
P120 to P124, and P130 to P137
Total of P100 to 102
Peak value
20
mA
r.m.s
10
mA
Operating temperature TA
During normal operation
–40 to +85
°C
During flash memory programming
10 to 40
°C
Storage temperature
Tstg
–55 to +125
°C