
9.0 System Wake-Up Control (SWC)
(Continued)
Revision 1.2
181
www.national.com
P
9.3.4
This register enables the wake-up events contained in bits 16-23 of the GPE1_STS register to generate an IRQ. It is reset
by hardware to 00h.
Power Well:V
PP
Location:
All Banks
, Offset 02h
Type:
R/W
GPE1_STS Events to IRQ Enable Low Register (GPE1_2IRQ_LOW)
Bit
7
6
5
4
3
2
1
0
Name
PWBT_EVT
_2IRQ
SLBT_EVT
_2IRQ
KBD_EVT3
_2IRQ
KBD_EVT2
_2IRQ
KBD_EVT1
_2IRQ
MS_EVT
_2IRQ
RI2_EVT
_2IRQ
RI1_EVT
_2IRQ
Reset
0
0
0
0
0
0
0
0
Bit
Description
7
PWBT_EVT_2IRQ (Power Button Event to IRQ Enable).
Enables the Power button pressing event to generate
an IRQ.
0: Disable IRQ (default)
1: Enable IRQ from Power button pressing event
6
SLBT_EVT_2IRQ (Sleep Button Event to IRQ Enable).
Enables the Sleep button pressing event to generate
an IRQ.
0: Disable IRQ (default)
1: Enable IRQ from Sleep button pressing event
5
KBD_EVT3_2IRQ (Keyboard Event 3 to IRQ Enable).
Enables the “PM Key 3” (keyboard) pressing event to
generate an IRQ.
0: Disable IRQ (default)
1: Enable IRQ from pressing “PM Key 3” on the keyboard
4
KBD_EVT2_2IRQ (Keyboard Event 2 to IRQ Enable).
Enables the “PM Key 2” (keyboard) pressing event to
generate an IRQ.
0: Disable IRQ (default)
1: Enable IRQ from pressing “PM Key 2” on the keyboard
3
KBD_EVT1_2IRQ (Keyboard Event 1 to IRQ Enable).
Enables the event of pressing any keyboard key, key
sequence or “PM Key 1” to generate an IRQ.
0: Disable IRQ (default)
1: Enable IRQ from pressing any key, key sequence or “PM Key 1” on the keyboard
2
MS_EVT_2IRQ (Mouse Event to IRQ Enable).
Enables a mouse event identified by the Keyboard/Mouse
Wake-up Detector to generate an IRQ.
0: Disable IRQ (default)
1: Enable IRQ from a mouse event identified by the Keyboard/Mouse Wake-up Detector
1
RI2_EVT_2IRQ (RI2 Event to IRQ Enable).
Enables a telephone ring event received at the Serial Port 2,
identified by the RI Wake-up Detector, to generate an IRQ.
0: Disable IRQ (default)
1: Enable IRQ from the telephone ring event received at the Serial Port 2
0
RI1_EVT_2IRQ (RI1 Event to IRQ Enable).
Enables a telephone ring event received at the Serial Port 1,
identified by the RI Wake-up Detector, to generate an IRQ.
0: Disable IRQ (default)
1: Enable IRQ from the telephone ring event received at the Serial Port 1