參數資料
型號: PI7C8140AMAE
廠商: Pericom
文件頁數: 27/82頁
文件大?。?/td> 0K
描述: IC PCI-PCI BRIDGE 2PORT 128-QFP
標準包裝: 39
系列: *
應用: *
接口: *
電源電壓: *
封裝/外殼: 128-BFQFP
供應商設備封裝: 128-QFP(14x20)
包裝: 管件
安裝類型: 表面貼裝
PI7C8140A
2-PORT PCI-TO-PCI BRIDGE
Page 33 of 82
March 20, 2007 – Revision 1.01
3
ADDRESS DECODING
The bridge uses three address ranges that control I/O and memory transaction forwarding. These
address ranges are defined by base and limit address registers in the configuration space. This chapter
describes these address ranges, as well as ISA-mode and VGA-addressing support.
3.1
ADDRESS RANGES
The bridge uses the following address ranges that determine which I/O and memory transactions are
forwarded from the primary PCI bus to the secondary PCI bus, and from the secondary bus to the
primary bus:
Two 32-bit I/O address ranges
Two 32-bit memory-mapped I/O (non-prefetchable memory) ranges
Two 32-bit prefetchable memory address ranges
Transactions falling within these ranges are forwarded downstream from the primary PCI bus to the
secondary PCI bus. Transactions falling outside these ranges are forwarded upstream from the
secondary PCI bus to the primary PCI bus.
No address translation is required in the bridge. The addresses that are not marked for downstream are
always forwarded upstream.
3.2
I/O ADDRESS DECODING
The bridge uses the following mechanisms that are defined in the configuration space to specify the I/O
address space for downstream and upstream forwarding:
I/O base and limit address registers
The ISA enable bit
The VGA mode bit
The VGA snoop bit
This section provides information on the I/O address registers and ISA mode. Section 3.4 provides
information on the VGA modes.
To enable downstream forwarding of I/O transactions, the I/O enable bit must be set in the command
register in configuration space. All I/O transactions initiated on the primary bus will be ignored if the
I/O enable bit is not set. To enable upstream forwarding of I/O transactions, the master enable bit must
be set in the command register. If the master-enable bit is not set, the bridge ignores all I/O and memory
transactions initiated on the secondary bus.
The master-enable bit also allows upstream forwarding of memory transactions if it is set.
CAUTION
If any configuration state affecting I/O transaction forwarding is changed by a configuration write
operation on the primary bus at the same time that I/O transactions are ongoing on the secondary bus,
07-0067
相關PDF資料
PDF描述
PI7C8150ANDE IC PCI-PCI BRIDGE 2PORT 256-PBGA
PI7C8150BNDIE IC PCI-PCI BRIDGE ASYNC 256-PBGA
PI7C8152BMAIE IC PCI-PCI BRIDGE 2PORT 160-MQFP
PI7C8154ANAE IC PCI-PCI BRIDGE ASYNC 304-PBGA
PI7C8154BNAIE IC PCI-PCI BRIDGE ASYNC 304-PBGA
相關代理商/技術參數
參數描述
PI7C8148A 制造商:PERICOM 制造商全稱:Pericom Semiconductor Corporation 功能描述:2-PORT PCI-TO-PCI BRIDGE ADVANCE INFORMATION
PI7C8148AEVB 功能描述:界面開發工具 64B/66MHz 2 Port PCI Bridge Eval Brd RoHS:否 制造商:Bourns 產品:Evaluation Boards 類型:RS-485 工具用于評估:ADM3485E 接口類型:RS-485 工作電源電壓:3.3 V
PI7C8148ANBE 功能描述:外圍驅動器與原件 - PCI 2-Port PCI-to-PCI Bridge RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
PI7C8148ANJ 制造商:PERICOM 制造商全稱:Pericom Semiconductor Corporation 功能描述:2-PORT PCI-TO-PCI BRIDGE ADVANCE INFORMATION
PI7C8148ANJE 功能描述:外圍驅動器與原件 - PCI 2-Port PCI-to-PCI Bridge RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray