
APPENDIX A DEVELOPMENT TOOLS
User’s Manual U16541EJ4V0UD
1045
Figure A-3. System Configuration (QB-V850ESSX2 Used) (2/2)
Notes 1.
Obtain the device file from the NEC Electronics website.
http://www.necel.com/micro/ods/eng/index.html
2.
Under development
3.
Depending on the ordering number, supplied with the device.
When QB-V850ESSX2-ZZZ is ordered
The exchange adapter and the target connector are not supplied.
When QB-V850ESSX2-S100GF is ordered
The QB-100GF-EA-01S and QB-100GF-TC-01S are supplied.
When QB-V850ESSX2-S100GC is ordered
The QB-100GC-EA-01S and QB-100GC-TC-01S are supplied.
When QB-V850ESSX2-T100GF is ordered
The QB-100GF-EA-01T, QB-100GF-YQ-01T, and QB-100GF-NQ-01T are supplied.
When QB-V850ESSX2-T100GC is ordered
The QB-100GC-EA-01T, QB-100GC-YQ-01T, and QB-100GC-NQ-01T are supplied.
4.
When using both <9> and <10>, the order between <9> and <10> is not cared.
<5> QB-V850ESSX2
Note
In-circuit emulator
The in-circuit emulator serves to debug hardware and software when developing
application systems using a V850ES/SG2 product. It corresponds to the integrated
debugger ID850QB. This emulator should be used in combination with a power
supply unit and emulation probe. Use USB to connect this emulator to the host
machine.
<3> USB interface cable
Cable to connect the host machine and the QB-V850ESSX2.
<4> AC adapter
100 to 240 V can be supported by replacing the AC plug.
<8> QB-100GF-EA-01S,
QB-100GC-EA-01S, QB-100GF-
EA-01T, QB-100GC-EA-01T
Exchange adapter
Adapter to perform pin conversion.
QB-100GF-EA-01S, QB-100GF-EA-01T: For 100-pin plastic QFP (GF-JBT type)
QB-100GC-EA-01S, QB-100GC-EA-01T: For 100-pin plastic LQFP (GC-8EA type)
<9> QB-100-CA-01S
Check pin adapter
Adapter used in waveform monitoring using the oscilloscope, etc.
<10> QB-100-SA-01S, QB-100GF-YS-
01T, QB-100GC-YS-01T
Space adapter
Adapter to adjust the height.
QB-100-SA-01S, QB-100GF-YS-01T: For 100-pin plastic QFP (for GF-JBT type)
QB-100-SA-01S, QB-100GC-YS-01T: For 100-pin plastic LQFP (for GC-8EA type)
<12> QB-100GF-MA-01S,
QB-100GC-MA-01S, QB-100GF-
HQ-01T, QB-100GC-HQ-01T
Mount adapter
Adapter to mount the V850ES/SG2 with socket.
QB-100GF-MA-01S, QB-100GF-HQ-01T: For 100-pin plastic QFP (GF-JBT type)
QB-100GC-MA-01S, QB-100GC-HQ-01T: For 100-pin plastic LQFP (GC-8EA type)
<13> QB-100GF-TC-01S,
QB-100GC-TC-01S, QB-100GF-
NQ-01T, QB-100GC-NQ-01T
Target connector
Connector to solder on the target system.
QB-100GF-TC-01S, QB-100GF-NQ-01T: For 100-pin plastic QFP (GF-JBT type)
QB-100GC-TC-01S, QB-100GC-NQ-01T: For 100-pin plastic LQFP (GC-8EA type)
Note QB-V850ESSX2 is supplied with a power supply unit, USB interface cable, and simple programmer PG-
FPL. It is also supplied with integrated debugger ID850QB as control software.
Remark
The numbers in the square brackets correspond to the numbers in Figure A-3.