參數資料
型號: T7698
廠商: Lineage Power
英文描述: Quad T1/E1 Line Interface and Octal T1/E1 Monitor(四T1/E1線接口和八T1/E1監控器)
中文描述: 四T1/E1線路接口和八路的T1/E1監視器(四個T1/E1線接口和八T1/E1的監控器)
文件頁數: 59/112頁
文件大?。?/td> 1359K
代理商: T7698
Data Sheet
January 1999
T7698 Quad T1/E1 Line Interface and Octal T1/E1 Monitor
59
Lucent Technologies Inc.
Frame Monitors
(continued)
Frame Formats
(continued)
CEPT Loss of Basic Frame Alignment (LFA)
Frame alignment is assumed to be lost when:
1.
As described in ITU Rec. G.706, Section 4.1.1, three (3) consecutive incorrect frame alignment signals have
been received.
Bit 2 in time slot 0 in NOT FAS frames has been received with an error on three consecutive occasions.
Optionally, as described in ITU Rec. G.706, Section 4.3.2, by exceeding a count of 914 errored CRC-4 blocks
out of 1000, with the understanding that a count of
915 errored CRC blocks indicates false frame alignment.
On demand via the control registers (by setting register Framer_PR2, bit 5 = 1).
2.
3.
4.
In the LFA state:
1.
2.
3.
4.
5.
6.
7.
No additional FAS or NOT FAS errors are processed.
The received remote frame alarm (received A bit) detection is deactivated.
All NOT FAS bit (Si bit, A bit and Sa4 to Sa8 bits) processing is halted.
Receive Sa6 code monitoring and counting is halted.
If CRC-4 is enabled, loss of CRC-4 multiframe alignment is forced.
If CRC-4 is enabled, the monitoring and processing of CRC-4 checksum errors is halted.
If CRC-4 is enabled, all monitoring and processing of received E-bit information is halted.
CEPT Loss of Frame Alignment Recovery Algorithm
The frame monitor begins the search for basic frame alignment one bit position beyond the position where the LFA
state was detected. As defined in ITU Rec. G.706, Section 4.1.2, frame alignment will be assumed to have been
recovered when the following sequence is detected:
1.
2.
For the first time, the presence of the correct frame alignment signal in frame n.
The absence of the frame alignment signal in the following frame detected by verifying that bit 2 of the basic
frame is a 1 in frame n + 1.
For the second time, the presence of the correct frame alignment in the next frame, n + 2.
3.
Failure to meet 2 or 3 above will initiate a new basic frame search in frame n + 2.
相關PDF資料
PDF描述
T7705A SUPPLY-VOLTAGE SUPERVISORS
T8100A H.100/H.110 Interface and Time-Slot Interchanger(H.100/H.110接口和干線時間段交換機)
T8100 H.100/H.110 Interface and Time-Slot Interchanger(H.100/H.110接口和干線時隙交換機)
T8102 H.100/H.110 Interface and Time-Slot Interchanger(H.100/H.110接口和干線時隙交換機)
T8105 H.100/H.110 Interface and Time-Slot Interchanger(H.100/H.110接口和干線時隙交換機)
相關代理商/技術參數
參數描述
T77 制造商:Thomas & Betts 功能描述:2-1/2"CONDUIT BODY,IRON,T,F-7 制造商:Cooper Crouse-Hinds 功能描述: 制造商:Thomas & Betts 功能描述:Fittings T-Fitting 2.5inch Non-Thread Iron
T7700 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:Core2 Duo Processors and Core2 Extreme Processors for Platforms Based on Mobile 965 Express Chipset Family
T77000150 制造商:Assembly Value Added 功能描述:
T7705102CA 制造商:Texas Instruments 功能描述:
T7705A 制造商:TI 制造商全稱:Texas Instruments 功能描述:SUPPLY-VOLTAGE SUPERVISORS