參數資料
型號： L84302
元件分類： 通用總線功能
英文描述： L84302 Quad 100/10 Mbps 4-Port Ethernet Controller with RMON/SNMP Management Counters technical manual 4/02
中文描述： L84302四100/10 Mbps的4端口以太網的遠程監控控制器/ SNMP管理處的技術手冊，4月2日
文件頁數： 35/128頁
文件大?。?/td> 997K
代理商： L84302
Functional Description
Copyright 1997-2002 by LSI Logic Corporation. All rights reserved.
35 of 128
April, 2002
The reception of MAC Control frames is unaffected by these bits and is
controlled by other bits described in
Section 3.16, “MAC Control Frames,”
page 52
.
3.5.8 Frame Validity Checks
The receive MAC determines the validity of each receive packet by
checking for (1) valid FCS, (2) oversize packet, and (3) undersize packet.
Valid FCS is determined by computing the CRC value on the incoming
receive packet per IEEE 802.3 specifications and comparing it against
the actual CRC value present in the FCS field of the received packet. If
the values are not the same, (1) the frame is determined to be invalid
and the packet is discarded, if the discard feature is enabled (2) the CRC
error detect bit is set in the RX Status register, (3) the CRC error bit is
set in the receive status word for the packet and (4) the interrupt pin for
the port is asserted provided the interrupt function is enabled. Refer to
Section 3.9, “Packet Discard,” page 41
, for more information about
discards. The device can be programmed to not discard and accept all
receive packets with bad FCS by setting the CRC error accept bit in the
RX Command register.
Oversize packets are packets whose length is greater than the maximum
packet size. If a received packet is an oversize packet, then (1) the
packet is determined to be invalid and it is discarded if the discard
feature is enabled, (2) the oversize packet detect bit is set in the RX
Status register, and (3) the interrupt pin for the port is asserted provided
the interrupt function is enabled. Refer to
Section 3.9, “Packet Discard,”
page 41
for more information about discards. The maximum packet size
can be programmed to be any one of sixteen values between 1518 bytes
and 1533 bytes, exclusive of preamble & SFD, by appropriately setting
the maximum packet size select bits in the Configuration 5 register. The
device also can be programmed to not discard and accept all receive
oversize packets, regardless of size, by setting the oversize packet
accept bit in the RX Command register.
Undersize packets are packets whose length is less than the minimum
packet size. Minimum packet size is defined to be 64 bytes, exclusive of
preamble & SFD. If a received packet is an undersize packet, then (1)
the frame is determined to be invalid and it is discarded if the discard
feature is enabled, (2) the undersize packet detect bit is set in the RX
Status register, and (3) the interrupt pin for the port is asserted provided
相關PDF資料
PDF描述
L8560 Low-Power SLIC with Ringing
L8567 SLIC for Peoples Republic of China Applications
L8567-32PLCC Telecommunication IC
L8567-44PLCC Telecommunication IC
L8574D CAP 15PF 50V 5% C0G SMD-0402 TR-7-PA SN100
相關代理商/技術參數
參數描述
L8446-04 制造商:HAMAMATSU 制造商全稱:Hamamatsu Corporation 功能描述:CW LASER DIODES
L8446-06 制造商:HAMAMATSU 制造商全稱:Hamamatsu Corporation 功能描述:CW LASER DIODES
L8446-07 制造商:HAMAMATSU 制造商全稱:Hamamatsu Corporation 功能描述:CW LASER DIODES
L8446-41 制造商:HAMAMATSU 制造商全稱:Hamamatsu Corporation 功能描述:CW LASER DIODES
L8446-42 制造商:HAMAMATSU 制造商全稱:Hamamatsu Corporation 功能描述:CW LASER DIODES
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*