參數資料
型號: S1C88848D0A0100
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 8.2 MHz, MICROCONTROLLER, UUC192
封裝: DIE-192
文件頁數: 141/174頁
文件大小: 1304K
代理商: S1C88848D0A0100
S1C88848 TECHNICAL MANUAL
EPSON
61
5 PERIPHERAL CIRCUITS AND THEIR OPERATION (Serial Interface)
TRXD0–TRXD7: 00FF4AH
During transmitting
Write the transmitting data into the transmit shift
register.
When "1" is written: HIGH level
When "0" is written: LOW level
Write the transmitting data prior to starting
transmitting.
In the case of continuous transmitting, wait for the
transmitting complete interrupt, then write the data.
The TRXD7 becomes invalid for the asynchronous
7-bit mode.
Converted serial data for which the bits set at "1" as
HIGH (VDD) level and for which the bits set at "0"
as LOW (VSS) level are output from the SOUT
terminal.
During receiving
Read the received data.
When "1" is read:
HIGH level
When "0" is read:
LOW level
The data from the received data buffer can be read out.
Since the sift register is provided separately from
this buffer, reading can be done during the receive
operation in the asynchronous mode. (The buffer
function is not used in the clock synchronous mode.)
Read the data after waiting for the receiving
complete interrupt.
When performing parity check in the asynchronous
7-bit mode, "0" is loaded into the 8th bit (TRXD7)
that corresponds to the parity bit.
The serial data input from the SIN terminal is level
converted, making the HIGH (VDD) level bit "1"
and the LOW (VSS) level bit "0" and is then loaded
into this buffer.
At initial reset, the buffer content is undefined.
OER: 00FF49HD4
Indicates the generation of an overrun error.
When "1" is read:
Error
When "0" is read:
No error
When "1" is written: Reset to "0"
When "0" is written: Invalid
OER is an error flag that indicates the generation of
an overrun error and becomes "1" when an error
has been generated.
An overrun error is generated when the receiving
of data has been completed prior to the writing of
"1" to RXTRG in the asynchronous mode.
OER is reset to "0" by writing "1".
At initial reset and when RXEN is "0", OER is set to
"0" (no error).
PER: 00FF49HD5
Indicates the generation of a parity error.
When "1" is read:
Error
When "0" is read:
No error
When "1" is written: Reset to "0"
When "0" is written: Invalid
PER is an error flag that indicates the generation of
a parity error and becomes "1" when an error has
been generated.
When a parity check is performed in the asynchro-
nous mode, if data that does not match the parity is
received, a parity error is generated.
PER is reset to "0" by writing "1".
At initial reset and when RXEN is "0", PER is set to
"0" (no error).
FER: 00FF49HD6
Indicates the generation of a framing error.
When "1" is read:
Error
When "0" is read:
No error
When "1" is written: Reset to "0"
When "0" is written: Invalid
FER is an error flag that indicates the generation of
a framing error and becomes "1" when an error has
been generated.
When the stop bit for the receiving of the asynchro-
nous mode has become "0", a framing error is
generated.
FER is reset to "0" by writing "1".
At initial reset and when RXEN is "0", FER is set to
"0" (no error).
PSIF0, PSIF1: 00FF20HD4, D5
Sets the priority level of the serial interface interrupt.
The two bits PSIF0 and PSIF1 are the interrupt
priority register corresponding to the serial inter-
face interrupt. Table 5.7.9.4 shows the interrupt
priority level which can be set by this register.
Table 5.7.9.4 Interrupt priority level settings
At initial reset, this register is set to "0" (level 0).
PSIF1
PSIF0
Interrupt priority level
1
0
1
0
1
0
Level 3 (IRQ3)
Level 2 (IRQ2)
Level 1 (IRQ1)
Level 0 (None)
相關PDF資料
PDF描述
S1C8F360F 8-BIT, FLASH, 8.2 MHz, MICROCONTROLLER, PQFP176
S1D13305F00B 640 X 256 PIXELS CRT CHAR OR GRPH DSPL CTLR, PQFP60
S1D13305F00A 640 X 256 PIXELS CRT CHAR OR GRPH DSPL CTLR, PQFP60
S1D13600F00A CRT OR FLAT PNL GRPH DSPL CTLR, PQFP64
S1D13700F02A100 320 X 240 PIXELS CRT OR FLAT PNL GRPH DSPL CTLR, PQFP64
相關代理商/技術參數
參數描述
S1C8F360D411000 功能描述:16位微控制器 - MCU 8-bit Flash 60KB LCD Dr. 51 x 32 RoHS:否 制造商:Texas Instruments 核心:RISC 處理器系列:MSP430FR572x 數據總線寬度:16 bit 最大時鐘頻率:24 MHz 程序存儲器大小:8 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:VQFN-40 安裝風格:SMD/SMT
S1C8F360D511000 功能描述:16位微控制器 - MCU 8-bit Flash 60KB LCD Dr. 51 x 32 RoHS:否 制造商:Texas Instruments 核心:RISC 處理器系列:MSP430FR572x 數據總線寬度:16 bit 最大時鐘頻率:24 MHz 程序存儲器大小:8 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:VQFN-40 安裝風格:SMD/SMT
S1C8F360F413100 功能描述:16位微控制器 - MCU 8-bit Flash 60KB LCD Dr. 51 x 32 RoHS:否 制造商:Texas Instruments 核心:RISC 處理器系列:MSP430FR572x 數據總線寬度:16 bit 最大時鐘頻率:24 MHz 程序存儲器大小:8 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:VQFN-40 安裝風格:SMD/SMT
S1C8F360F513200 功能描述:16位微控制器 - MCU 8-bit Flash 60KB LCD Dr. 51 x 32 RoHS:否 制造商:Texas Instruments 核心:RISC 處理器系列:MSP430FR572x 數據總線寬度:16 bit 最大時鐘頻率:24 MHz 程序存儲器大小:8 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:VQFN-40 安裝風格:SMD/SMT
S1C8F626 制造商:EPSON 制造商全稱:EPSON 功能描述:8-bit Single Chip Microcomputer