
152
EPSON
S1C8F626 TECHNICAL MANUAL
9 ELECTRICAL CHARACTERISTICS
9.7 Oscillation Characteristics
Oscillation characteristics change depending on conditions (board pattern, components used, etc.). Use the
following characteristics as reference values. In particular, when a ceramic oscillator or crystal oscillator is
used for OSC3, use the oscillator manufacturer’s recommended values for constants such as capacitance
and resistance. The oscillation start time is important because it becomes the wait time when OSC3 clock is
used. (If OSC3 is used as CPU clock before oscillation stabilizes, the CPU may malfunction.)
■ OSC1 (Crystal)
Item
Symbol
Min.
Typ.
Max.
Unit
Condition
Oscillation start time
External gate capacitance
Built-in drain capacitance
Frequency/IC deviation
Frequency/power voltage deviation
Frequency adjustment range
tsta
CG1
CD1
f/IC
f/V
f/CG
0
-10
25
10
3
25
10
1
s
pF
ppm
ppm/V
ppm
Including board capacitance
In case of the chip
VDD = constant
VDD = constant, CG = 0 to 25 pF
Note
Unless otherwise specified: VDD = 1.8 to 3.6 V, VSS = 0 V, Ta = 25
°C,
Crystal oscillator = C-002RX (R1 = 30 k
(Typ.), CL + 12.5 pF)*, CG1 = 25 pF, CD1 = Built-in
*
C-002RX Made by Seiko Epson
■ OSC3 (Crystal)
Min.
Typ.
Max.
Oscillation start time
tsta
10
ms
1
Item
Symbol
Unit
Condition
Note
Unless otherwise specified: VDD = 1.8 to 3.6 V, VSS = 0 V, Ta = 25
°C,
Crystal oscillator = CA-301*, RF = 1 M
, CG3 = CD3 = 15 pF
Note)
*
1
CA-301 Made by Seiko Epson
The crystal oscillation start time changes by the crystal oscillator to be used, CG3 and CD3.
■ OSC3 (Ceramic)
Min.
Typ.
Max.
tsta
1
ms
1
Oscillation start time
Item
Symbol
Unit
Condition
Note
Unless otherwise specified: VDD = 1.8 to 3.6 V, VSS = 0 V, Ta = 25
°C,
Ceramic oscillator = KBR-4.0MSB/KBR-8.0MSB*, RF = 1 M
, CG3 = CD3 = 30 pF
*
1
Note)
KBR-4.0MSB/KBR-8.0MSB Made by Kyocera
The ceramic oscillation start time changes by the ceramic oscillator to be used, CG3 and CD3.
■ OSC3 (CR)
Min.
Typ.
Max.
tsta
f/IC
-25
100
25
s
%
RCR = constant
Oscillation start time
Frequency/IC deviation
Item
Symbol
Unit
Condition
Note
Unless otherwise specified: VDD = 1.8 to 3.6 V, VSS = 0 V, Ta = 25
°C