參數資料
型號: MC68838FCC
廠商: MOTOROLA INC
元件分類: 微控制器/微處理器
英文描述: 1 CHANNEL(S), 125M bps, FDDI CONTROLLER, CQFP120
封裝: CERAMIC, QFP-120
文件頁數: 17/100頁
文件大?。?/td> 465K
代理商: MC68838FCC
MOTOROLA
MC68838 USER’S MANUAL
3- 3
3.1 REGISTER TYPES
The following paragraphs discuss the different types of registers used in the MAC.
3.1.1 Read/Write Registers
These registers can be read and written by the NP at any time. Usually, these registers
cannot be modified by the MAC chip. The only exceptions are the RESET_FIELD and
FDX_MODE bits in control register B. These registers are all cleared by power-up reset
(see Section 4 Signal Description for a description of the
PWRUP pin). Most bits in these
registers are unaffected by a MAC_Reset.
3.1.2 Read/Control Write Registers
These registers can be read by the NP at any time but can be written only when the MAC
FSMs are turned off (see MAC_ON bit in the control register A). These registers hold chip
parameters that the MAC needs before it can operate correctly. The NP should write these
registers before BIST is run. These registers cannot be modified by the MAC chip. All
these registers are cleared by power-up reset but are unaffected by a MAC_Reset.
3.1.3 Read-Only/Clear Registers
These registers can be read by the NP at any time (like all registers) but can never be
written by the NP (even in test mode). Unlike read-only registers, these registers are
automatically cleared when read by the NP. If the MAC chip tries to modify a register that
is being accessed by the NP, the register is cleared and the MAC writes the new updated
state. The MAC chip can change these registers at any time, even when the MAC FSMs
are turned off. These registers are all cleared by power-up reset.
3.1.4 Read-Only Registers
These registers can be read by the NP at any time but can never be modified by the NP.
The MAC chip can change these registers at any time, even when the MAC FSMs are
turned off. Generally, they are undefined after power-up reset.
The first six of these read-only registers (24–29 hex) are the only ones that are of interest
to general-purpose software. Through the remaining registers, the user can access almost
all MAC internal states. Access to these registers is essential for both ATE testing and
board-level diagnostics. Many of these registers hold part of an internal 24- or 32-bit
register that can change on each BYTCLK. Since only one register can be read at a time,
it may be difficult for an NP to obtain a consistent value of the internal register without
stopping BYTCLK.
Whenever the NP attempts to read a nonexistent register, the MAC chip completes the NP
read cycle normally (returning a valid, though unpredictable value) and records the
erroneous event by setting the NP_ERR bit in the interrupt event register B.
ARCHIVE
INFORMA
TION
ARCHIVE
INFORMA
TION
相關PDF資料
PDF描述
MC68EC020FG 32-BIT, 25 MHz, MICROCONTROLLER, PQFP100
MC68HC05CC1P 8-BIT, MROM, 4.2 MHz, MICROCONTROLLER, PDIP40
MC68HC05CC2B 8-BIT, MROM, 4.2 MHz, MICROCONTROLLER, PDIP42
MC68HC05CT4FN 8-BIT, MROM, 2.048 MHz, MICROCONTROLLER, PQCC44
MC68HC05J1P 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP20
相關代理商/技術參數
參數描述
MC68840FE25B 制造商:Motorola Inc 功能描述:68840FE25B
MC68840FE-25B 制造商:Motorola Inc 功能描述:68840FE-25B
MC6885 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:HEX THREE-STATE BUFFER/INVERTERS
MC68851 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:32-Bit Paged Memory Management Unit
MC6885L 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:HEX THREE-STATE BUFFER/INVERTERS