參數資料
型號: S1C63653F
元件分類: 微控制器/微處理器
英文描述: 4-BIT, FLASH, 4 MHz, MICROCONTROLLER, CQFP100
封裝: CERAMIC, QFP15-100
文件頁數: 5/121頁
文件大小: 1127K
代理商: S1C63653F
第1頁第2頁第3頁第4頁當前第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁
94
EPSON
S1C63653 TECHNICAL MANUAL
CHAPTER 4: PERIPHERAL CIRCUITS AND OPERATION (R/f Converter)
MC0–MC19: Measurement counter (FF92H–FF96H)
The measurement counter counts up according to the CR oscillation clock. It permits writing and reading
on a 4-bit basis.
The complement of the number of clocks to be counted by the oscillation of the reference resistance must
be entered in this counter prior to reference oscillation. When the counter reaches 00000H due to over-
flow, the oscillation of the reference resistance stops. When converting a sensor oscillation, 00000H must
be set in this register (it is unnecessary when it is done immediately after a reference oscillation has
completed). The sensor oscillation and measurement counter stop when the time base counter overflows.
Number of clocks counted by the sensor oscillation can be evaluated from the value indicated by the
counter when it stops. Calculate the target value by processing the above counted number according to
the program. Measurable range and the overflow of the counter must be taken into account when setting
an initial value to be entered prior to R/f conversion.
At initial reset, this counter is undefined.
TC0–TC19: Time base counter (FF97H–FF9BH)
Writing and reading is possible on a 4-bit basis by the time base counter that is used to adjust the CR
oscillation time between the reference resistance and the sensor.
The time base counter counts down during oscillation of the reference resistance and counts up to 00000H
during oscillation of the sensor.
00000H needs to be entered in the counter prior to a reference oscillation in order to adjust the CR
oscillating time (number of clocks) of both counts. The counter value after a reference oscillation has
completed should be read from this register and save it in the memory. The saved value should be set in
this counter before starting a sensor oscillation.
At initial reset, this counter is undefined.
RFCLK: Input clock selection (FF90HD2)
Selects the clock input to the time base counter.
When "1" is written: OSC3
When "0" is written: OSC1
Reading: Valid
Select the count clock for the time base counter. When "1" is written to RFCLK, the OSC3 clock is selected.
When "0" is written, the OSC1 clock (Typ. 32 kHz) is selected. To select the OSC3 clock, the OSC3 oscilla-
tion frequency must be 2 MHz or less.
At initial reset, this register is set to "0".
RFSEL: Sensor selection for channel 1 (FF90HD1)
Selects a sensor type to be used for channel 1.
When "1" is written: Resistive humidity sensor
When "0" is written: Resistive sensor
Reading: Valid
When "1" is written to RFSEL, a resistive humidity sensor is selected as the sensor for channel 1. When "0"
is written, a normal resistive sensor is selected.
At initial reset, this register is set to "0".
SENSEL: Channel selection register (FF90HD0)
Selects the channel to be converted.
When "1" is written: Channel 1
When "0" is written: Channel 0
Reading: Valid
When "1" is written to SENSEL, channel 1 is selected for R/f conversion and when "0" is written, channel
0 is selected.
At initial reset, this register is set to "0".
相關PDF資料
PDF描述
S1C6F567D0A0100 MICROCONTROLLER, UUC141
S1C6N3B0D0A0100 MICROCONTROLLER, UUC54
S1C6P366D0A0100 4-BIT, FLASH, 4.1 MHz, MICROCONTROLLER, UUC102
S1C6P466D0A0A00 MICROCONTROLLER, UUC140
S1C6S2L7D 4-BIT, MROM, 0.032 MHz, MICROCONTROLLER, UUC58
相關代理商/技術參數
參數描述
S1C63656 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63657 制造商:EPSON 制造商全稱:EPSON 功能描述:CMOS 4-bit Single Chip Microcontroller
S1C63658 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63666 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63709 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer