
TMXF28155 Super Mapper
155/51 Mbits/s SONET/SDH x28/x21 DS1/E1
Preliminary Data Sheet, Rev. 1
October2000
220
Lucent Technologies Inc.
SPE Mapper Functional Description
(continued)
Transmit Direction (to SONET/SDH Line)
(continued)
F3 Byte Insert
When control bit SPE_TF3INS = 1 (Table 130), insert the value in SPE_TF3DINS[7:0] (Table 133) in the outgoing
F3 byte; otherwise, insert the associated POAC value when bit SPE_TPOAC_F3 = 1 (Table 130) or insert the
default value determined by the microprocessor bit SMPR_OH_DEFLT (Table 15) when SPE_TPOAC_F3 = 0.
K3 Insert Control Parameters
When control bit SPE_TK3INS = 1 (Table 130), insert the value in SPE_TK3DINS[7:0] (Table 133) in the outgoing
K3 byte; otherwise, insert the associated POAC value when bit SPE_TPOAC_K3 = 1 (Table 130) or insert the
default value determined by the microprocessor bit SMPR_OH_DEFLT when SPE_TPOAC_K3 = 0.
N1 Insert Control Parameters
When control bit SPE_TN1INS = 1 (Table 130), insert the value in SPE_TN1DINS[7:0] (Table 133) in the outgoing
N1 byte; otherwise, insert the associated POAC value when bit SPE_TPOAC_N1 = 1 (Table 130) or insert the
default value determined by the microprocessor bit SMPR_OH_DEFLT when SPE_TPOAC_N1 = 0.
POAC Insert
One overhead access channel (POAC) is provided on-chip to provision the path overhead portion of the outgoing
frame. A POAC channel consists of the following signals:
I
A 576 kHz inverted clock signal sourced by the SPE mapper (TPOACCLK, pin AE4).
I
A 576 kbits/s data signal received by the SPE mapper in the transmit direction (TPOACDATA, pin AD5).
I
An 8 kHz synchronization signal (TPOACSYNC, pin AC5), sourced by the SPE mapper. The sync signal is nor-
mally low; during the first clock period of each frame coincident with the most significant bit of the first byte, the
sync signal is high.
The data signal is partitioned into frames of 9 bytes. The frame repetition rate is 8 kHz. Each byte consists of 8 bits
that are transmitted/received most significant bit first. The MSB of the second byte of each frame contains an odd/
even parity bit over the 72 bits of the previous frame. The remaining 7 bits of this byte are not specified. The POAC
input has full access to all the path overhead bytes of the STS-1 frame. Bytes shown in the table below summarize
the access capabilities of the transmit POAC channel.
Table 118. Path Overhead Byte Access—Transmit Direction
J1
POH Parity
C2
G1
F2
H4
F3
K3
N1