- 您現在的位置：買賣IC網 > PDF目錄1994 > DS3105LN+ (Maxim Integrated Products)IC TIMING LINE CARD 64-LQFP PDF資料下載
參數資料
| 型號： | DS3105LN+ |
| 廠商： | Maxim Integrated Products |
| 文件頁數： | 65/124頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC TIMING LINE CARD 64-LQFP |
| 產品培訓模塊： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 標準包裝： | 160 |
| 類型： | 定時卡 IC，多路復用器 |
| PLL： | 是 |
| 主要目的： | 以太網，SONET/SDH，Stratum，電信 |
| 輸入： | CMOS，LVDS，LVPECL，TTL |
| 輸出： | CMOS，LVDS，LVPECL，TTL |
| 電路數： | 1 |
| 比率 - 輸入:輸出： | 5:2 |
| 差分 - 輸入:輸出： | 無/是 |
| 頻率 - 最大： | 312.5MHz |
| 電源電壓： | 1.62 V ~ 1.98 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 64-LQFP |
| 供應商設備封裝： | 64-LQFP（10x10） |
| 包裝： | 托盤 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁當前第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁第122頁第123頁第124頁
DS3105
45
Table 7-19. External Frame-Sync Mode and Source
T0 DPLL
LOCKED
1
EFSEN
SOURCE
AEFSEN
SYNCSRC
SELREF
FRAME-SYNC
MODE
FRAME-SYNC
SOURCE
0
X
XXXX
2
X
XXX
XXXX
Disabled
Internal
3
1
0
XXXX
X
XXX
XXXX
Disabled
Internal
1
<>11XX
0
XXX
XXXX
SYNC1 Manual
SYNC1
1
<>11XX
1
XXX
=FSCR3:
SOURCE
SYNC1 Auto
SYNC1
<>FSCR3:
SOURCE
Internal
1
11XX
X
4
0XX
IC3 or IC5
SYNC123
(Auto
4)
SYNC1
IC4 or IC6
SYNC2
1X0
IC3
SYNC1
IC4
SYNC2
1X1
IC5
SYNC1
IC6
SYNC2
XXX
IC9
SYNC3
all other cases
Internal
Note 1:
That is, when OPSTATE:T0STATE = 100.
Note 2:
X = Don’t care.
Note 3:
None of the SYNCn pins is used. The internal 2kHz alignment generators free-run at their existing alignment. See Section 7.9.5.
Note 4:
When SOURCE=11XX, selection and enable of SYNCn pins are automatic regardless of the setting of AEFSEN. In this mode the
AEFSEN bit is retasked to specify whether or not MCR3:EFSEN is automatically cleared when the T0 DPLL’s selected reference
changes.
7.9.2 Sampling
By default the external frame-sync signal on the enabled SYNCn pin is first sampled on the rising edge of the
selected reference. This gives the most margin, given that the external frame-sync signal is falling-edge aligned
with the selected reference since both come from the same timing card. The expected timing of the SYNCn signal
with respect to the sampling clock can be adjusted from 0.5 cycles early to 1 cycle late using the
FSCR2:PHASEn[1:0] field.
7.9.3 Resampling
The SYNCn signal is then resampled by an internal clock derived from the T0 DPLL. The resampling resolution is a
function of the frequency of the selected reference and FSCR2:OCN. When OCN = 0, the resampling resolution is
6.48MHz, which gives the most sampling margin and also aligns all clocks at 6.48MHz and multiples thereof. When
OCN = 1, if the selected reference is 19.44MHz, the resampling resolution is 19.44MHz. If the selected reference is
38.88MHz, the resampling resolution is 38.88MHz. The selected reference must be either 19.44MHz or 38.88MHz
when OCN = 1.
7.9.4 Qualification
The SYNCn signal is qualified when it has consistent phase and correct frequency. Specifically, it is qualified when
its significant edge has been found at exact 2kHz boundaries (when resampled as previously described) for 64
cycles in a row. It is disqualified when one significant edge is not found at the 2kHz boundary.
7.9.5 Output Clock Alignment
When the T0 DPLL is locked, external frame sync is enabled, and the SYNCn signal is qualified, the SYNCn signal
can be used to falling-edge align the T0 DPLL derived output clocks. Output clocks FSYNC and MFSYNC share a
2kHz alignment generator, while the rest of the T0 DPLL-derived output clocks share a second 2kHz alignment
generator. When external frame sync is not enabled or the SYNCn signal is not qualified, these 2Hz alignment
相關PDF資料 |
PDF描述 |
|---|---|
| DS3106LN+ | IC TIMING LINE CARD 64-LQFP |
| DS3231MZ+ | IC RTC I2C 8SOIC |
| DS3231SN#T&R | IC RTC W/TCXO 16-SOIC |
| DS3232MZ+ | IC RTC W/SRAM I2C 8SOIC |
| DS3232SN#T&R | IC RTC W/TCXO 20-SOIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS3105LN+ | 功能描述:計時器和支持產品 Line Card Timing IC RoHS:否 制造商:Micrel 類型:Standard 封裝 / 箱體:SOT-23 內部定時器數量:1 電源電壓-最大:18 V 電源電壓-最小:2.7 V 最大功率耗散: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Reel |
| DS3106 | 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:Line Card Timing IC |
| DS3106A10SL3S(621) | 制造商:Amphenol Corporation 功能描述: |
| DS3106A14S2S | 制造商:Amphenol Corporation 功能描述: |
| DS3106A14S2S(621) | 制造商:Amphenol Corporation 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。