- 您現在的位置：買賣IC網 > PDF目錄1994 > DS3105LN+ (Maxim Integrated Products)IC TIMING LINE CARD 64-LQFP PDF資料下載
參數資料
| 型號： | DS3105LN+ |
| 廠商： | Maxim Integrated Products |
| 文件頁數： | 54/124頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC TIMING LINE CARD 64-LQFP |
| 產品培訓模塊： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 標準包裝： | 160 |
| 類型： | 定時卡 IC，多路復用器 |
| PLL： | 是 |
| 主要目的： | 以太網，SONET/SDH，Stratum，電信 |
| 輸入： | CMOS，LVDS，LVPECL，TTL |
| 輸出： | CMOS，LVDS，LVPECL，TTL |
| 電路數： | 1 |
| 比率 - 輸入:輸出： | 5:2 |
| 差分 - 輸入:輸出： | 無/是 |
| 頻率 - 最大： | 312.5MHz |
| 電源電壓： | 1.62 V ~ 1.98 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 64-LQFP |
| 供應商設備封裝： | 64-LQFP（10x10） |
| 包裝： | 托盤 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁當前第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁第122頁第123頁第124頁
DS3105
35
7.8
Output Clock Configuration
A total of four output clock pins, OC3, OC6, FSYNC, and MFSYNC, are available on the device. Output clocks OC3
and OC6 are individually configurable for a variety of frequencies. Output clocks FSYNC and MFSYNC are more
specialized, serving as an 8kHz frame sync (FSYNC) and a 2kHz multiframe sync (MFSYNC). Table 7-6 provides
more detail on the capabilities of the output clock pins.
Table 7-6. Output Clock Capabilities
OUTPUT
CLOCK
SIGNAL
FORMAT
FREQUENCIES SUPPORTED
OC3
CMOS/TTL
OC6
LVDS/LVPECL
FSYNC
CMOS/TTL
8kHz frame sync with programmable pulse width and polarity.
MFSYNC
2kHz multiframe sync with programmable pulse width and polarity.
7.8.1 Signal Format Configuration
Output clock OC6 is an LVDS-compatible, LVPECL level-compatible outputs. The type of output can be selected or
the output can be disabled using the OC6SF configuration bits in the MCR8 register. The LVPECL level-compatible
mode generates a differential signal that is large enough for most LVPECL receivers. Some LVPECL receivers
have a limited common-mode signal range that can be accommodated for by using an AC-coupled signal. The
LVDS electrical specifications are listed in Table 10-5, and the recommended LVDS termination is shown in Figure
10-1. The LVPECL level-compatible electrical specifications are listed in Table 10-6, and the recommended
LVPECL receiver termination is shown in Figure 10-3. These differential outputs can be easily interfaced to LVDS,
LVPECL, and CML inputs on neighboring ICs using a few external passive components. See App Note HFAN-1.0
for details.
Output clocks OC3, FSYNC, and MFSYNC are CMOS/TTL signal format.
7.8.2 Frequency Configuration
The frequency of output clocks OC3 and OC6 is a function of the settings used to configure the components of the
T0 and T4 PLL paths. These components are shown in the detailed block diagram of Figure 7-1.
The DS3105 uses digital frequency synthesis (DFS) to generate various clocks. In DFS a high-speed master clock
(204.8MHz) is divided down to the desired output frequency by adding a number to an accumulator. The DFS
output is a coding of the clock output phase that is used by a special circuit to determine where to put the edges of
the output clock between the clock edges of the master clock. The edges of the output clock, however, are not
ideally located in time, resulting in jitter with an amplitude typically less than 1ns pk-pk.
7.8.2.1 T0 and T4 DPLL Details
See Figure 7-1. The T0 and T4 forward-DFS blocks use the 204.8MHz master clock and DFS technology to
synthesize internal clocks from which the output and feedback clocks are derived. The T4 DPLL only has a single
DFS output clock signal, whereas there are two DFS output clock signals in the T0 DPLL—one for the output
clocks and one for the feedback clock.
In the T0 DPLL the feedback clock-signal output handles phase build-out or any phase offset configured in the
OFFSET registers. Thus the T0 DPLL output-clock signals and the feedback clock signal are frequency-locked but
may have a phase offset. The T0 and T4 feedback-DFS blocks are always connected to the T0 forward DFS and
the T4 forward DFS, respectively. The feedback DFS blocks synthesize the appropriate locking frequencies for use
by the phase-frequency detectors (PFDs). See Section 7.4.2.
相關PDF資料 |
PDF描述 |
|---|---|
| DS3106LN+ | IC TIMING LINE CARD 64-LQFP |
| DS3231MZ+ | IC RTC I2C 8SOIC |
| DS3231SN#T&R | IC RTC W/TCXO 16-SOIC |
| DS3232MZ+ | IC RTC W/SRAM I2C 8SOIC |
| DS3232SN#T&R | IC RTC W/TCXO 20-SOIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS3105LN+ | 功能描述:計時器和支持產品 Line Card Timing IC RoHS:否 制造商:Micrel 類型:Standard 封裝 / 箱體:SOT-23 內部定時器數量:1 電源電壓-最大:18 V 電源電壓-最小:2.7 V 最大功率耗散: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Reel |
| DS3106 | 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:Line Card Timing IC |
| DS3106A10SL3S(621) | 制造商:Amphenol Corporation 功能描述: |
| DS3106A14S2S | 制造商:Amphenol Corporation 功能描述: |
| DS3106A14S2S(621) | 制造商:Amphenol Corporation 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。