
PRELIMINARY DATA SHEET v3.1
CL-PD6710/’22
ISA–to–PC-Card Host Adapters
May 1997
64
EXTENSION REGISTERS
9.5
ATA Control
Bit 0 — ATA Mode
This bit reconfigures the particular socket as an ATA drive interface. Refer to
Table 11-1 on
page 75
for PC Card socket pin definitions in ATA mode.
Bit 1 — Speaker Is LED Input
This bit changes the function of the BVD2/-SPKR/-LED pin (see
page 18
) from digital speaker in-
put to disk status LED input. When in I/O Card Interface mode or ATA mode, setting this bit to ‘1’
reconfigures the BVD2/-SPKR/-LED input pin to serve as a -LED input from the socket.
NOTE:
This bit should be set to ‘0’ if in Memory Card Interface mode.
Bit 3 — A21
In ATA mode, the value in this bit is applied to the ATA A21 pin and is vendor-specific. Certain ATA
drive vendor-specific performance enhancements beyond the PC Card Standard may be con-
trolled through use of this bit. This bit has no hardware control function when not in ATA mode.
Bit 4 — A22
In ATA mode, the value in this bit is applied to the ATA A22 pin and is vendor-specific. Certain ATA
drive vendor-specific performance enhancements beyond the PC Card Standard may be con-
trolled through use of this bit. This bit has no hardware control function when not in ATA mode.
Bit 5 — A23/VU
In ATA mode, the value in this bit is applied to the ATA A23 pin and is vendor-specific. Certain ATA
drive vendor-specific performance enhancements beyond the PC Card Standard may be con-
trolled through use of this bit. This bit has no hardware control function when not in ATA mode.
Bit 6 — A24/M/S*
In ATA mode, the value in this bit is applied to the ATA A24 pin and is vendor-specific. Certain ATA
drive vendor-specific performance enhancements beyond the PC Card Standard may be con-
trolled through use of this bit. This bit has no hardware control function when not in ATA mode.
Bit 7 — A25/CSEL
In ATA mode, the value in this bit is applied to the ATA A25 pin and is vendor-specific. Certain ATA
drive vendor-specific performance enhancements beyond the PC Card Standard may be con-
trolled through use of this bit. This bit has no hardware control function when not in ATA mode.
Register Name:
ATA Control
Index:
26h
Bit
7
Register Per: socket
Register Compatibility Type: ext.
Bit
1
Bit
6
Bit
5
Bit
4
Bit
3
Bit
2
Bit
0
A25/CSEL
A24/M/S*
A23/VU
A22
A21
Scratchpad Bit
Speaker Is
LED Input
ATA Mode
RW:0
RW:0
RW:0
RW:0
RW:0
RW:0
RW:0
RW:0
0
1
Normal operation.
Configures the socket interface to handle ATA-type disk drives.
0
1
Normal operation.
The PC Card -SPKR pin will be used to drive IRQ12 if Drive LED Enable (see page
61
) is set.