• <dfn id="eoqws"></dfn>
  • <td id="eoqws"><input id="eoqws"><dfn id="eoqws"></dfn></input></td>
  • <form id="eoqws"></form>
    參數資料
    型號: MT90812
    廠商: Mitel Networks Corporation
    英文描述: Integrated Digital Switch (IDX)(集成數字開關)
    中文描述: 綜合數字交換機(IDX的)(集成數字開關)
    文件頁數: 33/105頁
    文件大?。?/td> 334K
    代理商: MT90812
    Advance Information
    MT90812
    29
    9.5
    C8P Pin Timing Source
    The MT90812 can use either a clock or crystal, connecting to pins C8P_C16i and OSCo, as a reference timing
    source.
    9.5.1
    Fig. 19 shows a 8.192MHz clock oscillator, with 32 ppm tolerance, directly connected to C8P_C16i pin of the
    MT90812. The output clock should be connected directly (not AC coupled) to the C8P_C16i pin, and the OSCo
    output should be left open.
    Clock Oscillator
    Figure 19 - Clock Oscillator Circuit
    9.5.2
    Alternatively, a Crystal Oscillator may be used. A complete oscillator circuit made up of a crystal, resistor and
    capacitors is shown in Fig. 20.
    Crystal Oscillator
    The accuracy of a crystal oscillator depends on the crystal tolerance as well as the load capacitance tolerance.
    Typically, for a 8.192MHz crystal specified with a 32pF load capacitance, each 1pF change in load capacitance
    contributes approximately 9ppm to the frequency deviation. Consequently, capacitor tolerances, and stray
    capacitances have a major effect on the accuracy of the oscillator frequency.
    The trimmer capacitor shown in Fig. 20 may be used to compensate for capacitive effects. If accuracy is not a
    concern, then the trimmer may be removed, the 39pF capacitor may be increased to 56pF, and a wider
    tolerance crystal may be substituted.
    The crystal should be a fundamental mode type. The fundamental mode crystal permits a simpler oscillator
    circuit with no additional filter components and is less likely to generate spurious responses. The crystal
    specification is as follows:
    Frequency:
    Tolerance:
    Oscillation Mode:
    Resonance Mode:
    Load Capacitance:
    Maximum Series Resistance:
    Approximate Drive Level:
    e.g. CTS R1B23B32-8.192MHz
    (20ppm absolute 6 ppm 0C to 50C, 32pF, 25
    8.192MHz
    As required
    Fundamental
    Parallel
    20pF
    35
    1mW
    +5V
    8.192MHz
    GND
    0.1uF
    +5V
    C8P_C16i
    No Connection
    OSCo
    MT90812
    相關PDF資料
    PDF描述
    MT90840AK Distributed Hyperchannel Switch
    MT90840AP Distributed Hyperchannel Switch
    MT9085B PAC - Parallel Access Circuit(并行存取電路)
    MT9092 Digital Telephone with HDLC(數字電話(帶高階數據鏈路控制HDLC))
    MT9092 ISO2-CMOS ST-BUS⑩ FAMILY Digital Telephone with HDLC (HPhone-II)
    相關代理商/技術參數
    參數描述
    MT90812AL 制造商:Microsemi Corporation 功能描述:SWIT FABRIC 192 X 192 16.384MBPS 5V 64MQFP - Trays 制造商:Zarlink Semiconductor Inc 功能描述:SWIT FABRIC 192 X 192 16.384MBPS 5V 64MQFP - Trays
    MT90812AL1 制造商:Microsemi Corporation 功能描述:SWIT FABRIC 192 X 192 16.384MBPS 5V 64MQFP - Trays 制造商:Microsemi Corporation 功能描述:PB FREE INTEGRATED DIGITAL SWITCH
    MT90812AP 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:Integrated Digital Switch (IDX)
    MT90812AP1 制造商:Zarlink Semiconductor Inc 功能描述:SWIT FABRIC 192 X 192 16.384MBPS 5V 68PLCC /BAKE/DRYPACK - Rail/Tube 制造商:Zarlink Semiconductor Inc 功能描述:INTEGRATED DIGITAL SWCH
    MT90812APR 制造商:Microsemi Corporation 功能描述:SWIT FABRIC 192 X 192/64 X 64 1.048GBPS 5V 68PLCC - Tape and Reel