
DS3161/DS3162/DS3163/DS3164
Bit 5: Receive Idle Cell Detection Latched (RIDL) – This bit is set when an idle cell is discarded.
Bit 4: Receive Unassigned Cell Detection Latched (RUDL) – This bit is set when an unassigned cell is
discarded.
Bit 3: Receive Invalid Cell Detection Latched (RIVDL) – This bit is set when an invalid cell is discarded.
Bit 2: Receive Errored Header Cell Count Latched (RECCL) – This bit is set when the RECC bit in the CP.RSR
register transitions from zero to one.
Bit 1: Receive Header Pattern Cell Count Latched (RHPCL) – This bit is set when the RHPC bit in the CP.RSR
register transitions from zero to one.
Bit 0: Receive Corrected Header Cell Count Latched (RCHCL) – This bit is set when the RCHC bit in the
CP.RSR register transitions from zero to one.
Register Name:
CP.RSRIE
Register Description:
Cell Processor Receive Status Register Interrupt Enable
Register Address/Type:
(1,3,5,7)D2h
Bit #
15
14
13
12
11
10
9
8
Name
--
OOSIE
COCDIE
OCDCIE
LCDCIE
Default
0
Bit #
7
6
5
4
3
2
1
0
Name
RECIE
RCHIE
RIDIE
RUDIE
RIVDIE
RECCIE
RHPCIE
RCHCIE
Default
0
Bit 11: Out Of Sync Change Interrupt Enable (OOSIE) – This bit enables an interrupt if the OOSL bit in the
CP.RSRL register is set and the bit in
GL.ISRIE.PSRIE[4:1] that corresponds to this port is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 10: Change Of Cell Delineation Interrupt Enable (COCDIE) – This bit enables an interrupt if the COCDL bit
in the CP.RSRL register is set and the bit in
GL.ISRIE.PSRIE[4:1] that corresponds to this port is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 9: Out Of Cell Delineation Change Interrupt Enable (OCDCIE) – This bit enables an interrupt if the OCDCL
bit in the CP.RSRL register is set and the bit in
GL.ISRIE.PSRIE[4:1] that corresponds to this port is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 8: Loss Of Cell Delineation Change Interrupt Enable (LCDCIE) – This bit enables an interrupt if the LCDCL
bit in the CP.RSRL register is set and the bit in
GL.ISRIE.PSRIE[4:1] that corresponds to this port is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 7: Receive Errored Header Cell Interrupt Enable (RECIE) – This bit enables an interrupt if the RECL bit in
the CP.RSRL register is set and the bit in
GL.ISRIE.PSRIE[4:1] that corresponds to this port is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 6: Receive Corrected Header Cell Interrupt Enable (RCHIE) – This bit enables an interrupt if the RCHL bit in
the CP.RSRL register is set and the bit in
GL.ISRIE.PSRIE[4:1] that corresponds to this port is set.
0 = interrupt disabled
1 = interrupt enabled