
384
APPENDIX A DEVELOPMENT TOOLS
User
’
s Manual U15017EJ2V0UD
A.3 Debugging Tools
A.3.1 Hardware
IE-78K4-NS
In-circuit emulator
IE-70000-MC-PS-B
Power supply unit
IE-70000-98-IF-C
Interface adapter
IE-70000-CD-IF-A
PC card interface
IE-70000-PC-IF-C
Interface adapter
IE-70000-PCI-IF-A
Interface adapter
IE-784976-NS-EM1
Emulation board
NP-100GF
Emulation probe
EV-9200GF-100
Conversion socket
(Refer to
Figures
A-5
and
A-6
)
NP-100GF-TQ
Emulation probe
TGF-100RBP
Conversion connector
Remarks 1.
NP-100GF and NP-100GF-TQ are products made by Naito Densei Machida Mfg. Co., Ltd.
Phone: +8-45-475-4191 Naito Densei Machida Mfg. Co., Ltd.
2.
The TGF-100RBP is a product made by TOKYO ELETECH CORPORATION.
For further information, contact Daimaru Kogyo, Ltd.
Tokyo Electronic Division (TEL: +81-3-3820-7112)
Osaka Electronic Division (TEL: +81-6-6244-6672)
3.
EV-9200GF-100 is sold in five-unit sets.
The in-circuit emulator serves to debug hardware and software when developing
application systems using a 78K/IV Series product. It supports integrated debugger
(ID78K4-NS). This emulator should be used in combination with power supply unit,
emulation probe, and interface adapter which is required to connect this emulator to
the host machine.
This adapter is used for supplying power from a receptacle of 100 to 240 V AC.
This adapter is required when using the PC-9800 series computer (except notebook
type) as the IE-78K4-NS host machine (supporting C bus).
These PC card and interface cable are required when using a notebook-type PC as
the IE-78K4-NS host machine (supporting PCMCIA socket).
This adapter is required when using the IBM PC/AT compatible computers as the
IE-78K4-NS host machine (supporting ISA bus).
This adapter is required when using a personal computer provided with a PCI bus as
the IE-78K4-NS host machine.
This board emulates the operations of the peripheral hardware peculiar to a device.
It should be used in combination with an in-circuit emulator.
This probe is used to connect the in-circuit emulator to the target system and is
designed for 100-pin plastic QFP (GF-3BA type).
This conversion socket connects the NP-100GF to the target system board
designed to mount a 100-pin plastic QFP (GF-3BA type).
This probe is used to connect the in-circuit emulator to the target system and is
designed for 100-pin plastic QFP (GF-3BA type).
This conversion connector connects the NP-100GF-TQ to the target system board
designed to mount a 100-pin plastic QFP (GF-3BA type).