參數資料
型號： M306H3FCFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP116
封裝： 20 X 20 MM, 0.65 MM PITCH, PLASTIC, LQFP-116
文件頁數： 7/135頁
文件大?。?/td> 2583K
代理商： M306H3FCFP
Rev.1.00
2004.03.23
page 104 of 320
M306H3MC-XXXFP/FCFP
Item
Specification
Count source
f1, f2, f8, f32, fC32
Count operation
Down-count
When the timer underflows, it reloads the reload register contents and
continues counting
Divide ratio
1/(n+1)
n: set value of TBiMR register (i= 0 to 5)
000016 to FFFF16
Count start condition
Set TBiS bit(Note) to “1” (= start counting)
Count stop condition
Set TBiS bit to “0” (= stop counting)
Interrupt request generation timing
Timer underflow
TBiIN pin function
I/O port
Read from timer
Count value can be read by reading TBi register
Write to timer
When not counting and until the 1st count source is input after counting start
Value written to TBi register is written to both reload register and counter
When counting (after 1st count source input)
Value written to TBi register is written to only reload register
(Transferred to counter when reloaded next)
Note : The TB0S to TB2S bits are assigned to the TABSR register bit 5 to bit 7, and the TB3S to TB5S
bits are assigned to the TBSR register bit 5 to bit 7.
(1) Timer Mode
In timer mode, the timer counts a count source generated internally (see Table 2.10.6). Figure 2.10.17
shows TBiMR register in timer mode.
Table 2.10.6. Specifications in Timer Mode
Timer Bi mode register (i= 0 to 5)
Symbol
Address
After reset
TB0MR to TB2MR
039B16 to 039D16
00XX00002
TB3MR to TB5MR
035B16 to 035D16
00XX00002
Bit name
Function
Bit symbol
RW
b7
b6
b5
b4
b3
b2
b1
b0
Operation mode select bit
0 0 : Timer mode
b1 b0
TMOD1
TMOD0
MR0
Has no effect in timer mode
Can be set to “0” or “1”
MR2
MR1
MR3
0 0 : f1 or f2
0 1 : f8
1 0 : f32
1 1 : fC32
TCK1
TCK0
Count source select bit
0
TB0MR, TB3MR registers
Must be set to “0” in timer mode
b7 b6
RW
RO
TB1MR, TB2MR, TB4MR, TB5MR registers
Nothing is assigned. When write, set to “0”. When read, its
content is indeterminate
When write in timer mode, set to “0”. When read in timer mode, its
content is indeterminate.
Figure 2.10.17. TBiMR Register in Timer Mode
相關PDF資料
PDF描述
M306H5MG-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP116
M306H5MG-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP116
M306H5FGFP 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP116
M306N4FGVFP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
M306N4MGT-XXXFP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
M306H3FCFP#U0 制造商:Renesas Electronics Corporation 功能描述:MCU 16BIT R8C CISC 128KB FLASH 5V 116LQFP - Trays
M306H3MC-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER
M306H5FGFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SNGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER
M306H5FGFP#U0 功能描述:IC M16C/6H MCU FLASH 116LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:M16C™ M16C/60 標準包裝:160 系列:S08 核心處理器:S08 芯體尺寸:8-位 速度:40MHz 連通性:I²C，LIN，SCI，SPI 外圍設備:LCD，LVD，POR，PWM，WDT 輸入/輸出數:53 程序存儲器容量:32KB（32K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1.9K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 5.5 V 數據轉換器:A/D 12x12b 振蕩器型:內部 工作溫度:-40°C ~ 105°C 封裝/外殼:64-LQFP 包裝:托盤
M306H5MC-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SNGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*