參數資料
型號： M306H3FCFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP116
封裝： 20 X 20 MM, 0.65 MM PITCH, PLASTIC, LQFP-116
文件頁數： 22/135頁
文件大?。?/td> 2583K
代理商： M306H3FCFP
Rev.1.00
2004.03.23
page 118 of 320
M306H3MC-XXXFP/FCFP
Table 2. 11. 2. Registers to Be Used and Settings in Clock Synchronous Serial I/O Mode
Register
Bit
Function
UiTB(Note3)
0 to 7
Set transmission data
UiRB(Note3) 0 to 7
Reception data can be read
OER
Overrun error flag
UiBRG
0 to 7
Set a transfer rate
UiMR(Note3) SMD2 to SMD0
Set to “0012”
CKDIR
Select the internal clock or external clock
IOPOL
Set to “0”
UiC0
CLK1 to CLK0
Select the count source for the UiBRG register
CRS
_______
Select CTS or RTS to use
TXEPT
Transmit register empty flag
CRD
_______
Enable or disable the CTS or RTS function
NCH
Select TxDi pin output mode (Note 2)
CKPOL
Select the transfer clock polarity
UFORM
Select the LSB first or MSB first
UiC1
TE
Set this bit to “1” to enable transmission/reception
TI
Transmit buffer empty flag
RE
Set this bit to “1” to enable reception
RI
Reception complete flag
U2IRS (Note 1)
Select the source of UART2 transmit interrupt
U2RRM (Note 1)
Set this bit to “1” to use continuous receive mode
UiLCH
Set this bit to “1” to use inverted data logic
UiERE
Set to “0”
UiSMR
0 to 7
Set to “0”
UiSMR2
0 to 7
Set to “0”
UiSMR3
0 to 2
Set to “0”
NODC
Select clock output mode
4 to 7
Set to “0”
UiSMR4
0 to 7
Set to “0”
UCON
U0IRS, U1IRS
Select the source of UART0/UART1 transmit interrupt
U0RRM, U1RRM
Set this bit to “1” to use continuous receive mode
CLKMD0
Select the transfer clock output pin when CLKMD1 = 1
CLKMD1
Set this bit to “1” to output UART1 transfer clock from two pins
RCSP
_________
Set this bit to “1” to accept as input the UART0 CTS0 signal from the P64 pin
7
Set to “0”
Note 1: Set the U0C1 and U1C1 register bit 4 and bit 5 to “0”. The U0IRS, U1IRS, U0RRM and U1RRM bits
are in the UCON register.
Note 2: TxD2 pin is N channel open-drain output. Set the U2C0 register's NCH bit to “0”.
Note 3: Not all register bits are described above. Set those bits to “0” when writing to the registers in clock
synchronous serial I/O mode.
i=0 to 2
相關PDF資料
PDF描述
M306H5MG-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP116
M306H5MG-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP116
M306H5FGFP 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP116
M306N4FGVFP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
M306N4MGT-XXXFP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
M306H3FCFP#U0 制造商:Renesas Electronics Corporation 功能描述:MCU 16BIT R8C CISC 128KB FLASH 5V 116LQFP - Trays
M306H3MC-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER
M306H5FGFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SNGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER
M306H5FGFP#U0 功能描述:IC M16C/6H MCU FLASH 116LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:M16C™ M16C/60 標準包裝:160 系列:S08 核心處理器:S08 芯體尺寸:8-位 速度:40MHz 連通性:I²C，LIN，SCI，SPI 外圍設備:LCD，LVD，POR，PWM，WDT 輸入/輸出數:53 程序存儲器容量:32KB（32K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1.9K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 5.5 V 數據轉換器:A/D 12x12b 振蕩器型:內部 工作溫度:-40°C ~ 105°C 封裝/外殼:64-LQFP 包裝:托盤
M306H5MC-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SNGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*