參數資料
型號： M306H3FCFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP116
封裝： 20 X 20 MM, 0.65 MM PITCH, PLASTIC, LQFP-116
文件頁數： 27/135頁
文件大小： 2583K
代理商： M306H3FCFP
Rev.1.00
2004.03.23
page 122 of 320
M306H3MC-XXXFP/FCFP
(c) Continuous Receive Mode
When the UiRRM bit (i = 0 to 2) = 1 (continuous receive mode), the UiC1 register’s TI bit is set to “0”
(data present in the UiTB register) by reading the UiRB register. In this case, i.e., UiRRM bit = 1, do not
write dummy data to the UiTB register in a program. The U0RRM and U1RRM bits are the UCON
register bit 2 and bit 3, respectively, and the U2RRM bit is the U2C1 register bit 5.
(d) Serial Data Logic Switching Function
When the UiC1 register (i = 0 to 2)’s UiLCH bit = 1 (reverse), the data written to the UiTB register has
its logic reversed before being transmitted. Similarly, the received data has its logic reversed when
read from the UiRB register. Figure 2.11.12 shows serial data logic.
Figure 2.11.12. Serial Data Logic Switching
D0
D1
D2
D3
D4
D5
D6
D7
Transfer clock
TxDi
(no reverse)
“H”
“L”
“H”
“L”
TxDi
(reverse)
D0
D1
D2
D3
D4
D5
D6
D7
“H”
“L”
(1) When the UiC1 register's UiLCH bit = 0 (no reverse)
Transfer clock
“H”
“L”
(2) When the UiC1 register's UiLCH bit = 1 (reverse)
Note: This applies to the case where the UiC0 register’s CKPOL bit = 0
(transmit data output at the falling edge and the receive data
taken in at the rising edge of the transfer clock) and the UFORM
bit = 0 (LSB first).
i = 0 to 2
(e) Transfer Clock Output From Multiple Pins (UART1)
Use the UCON register’s CLKMD1 to CLKMD0 bits to select one of the two transfer clock output pins.
(See Figure 2.11.13.) This function can be used when the selected transfer clock for UART1 is an
internal clock.
Figure 2.11.13. Transfer Clock Output From Multiple Pins
Microcomputer
TXD1 (P67)
CLKS1 (P64)
CLK1 (P65)
IN
CLK
IN
CLK
Note: This applies to the case where the U1MRregister's CKDIR bit
= 0 (internal clock) and the UCON register's CLKMD1 bit = 1 (
transfer clock output from multiple pins).
Transfer enabled
when the UCON
register's
CLKMD0 bit = 0
Transfer enabled
when the UCON
register's
CLKMD0 bit = 1
相關PDF資料
PDF描述
M306H5MG-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP116
M306H5MG-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP116
M306H5FGFP 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP116
M306N4FGVFP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
M306N4MGT-XXXFP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
M306H3FCFP#U0 制造商:Renesas Electronics Corporation 功能描述:MCU 16BIT R8C CISC 128KB FLASH 5V 116LQFP - Trays
M306H3MC-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER
M306H5FGFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SNGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER
M306H5FGFP#U0 功能描述:IC M16C/6H MCU FLASH 116LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:M16C™ M16C/60 標準包裝:160 系列:S08 核心處理器:S08 芯體尺寸:8-位 速度:40MHz 連通性:I²C，LIN，SCI，SPI 外圍設備:LCD，LVD，POR，PWM，WDT 輸入/輸出數:53 程序存儲器容量:32KB（32K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1.9K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 5.5 V 數據轉換器:A/D 12x12b 振蕩器型:內部 工作溫度:-40°C ~ 105°C 封裝/外殼:64-LQFP 包裝:托盤
M306H5MC-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SNGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*