參數資料
型號： ICSXXXXY
英文描述： Auto-Negotiation Advertisement Register (register 4 [0x04])
中文描述： 自動談判廣告登記（注冊4 [0x04]）
文件頁數： 12/66頁
文件大小： 1725K
代理商： ICSXXXXY
12
ICS1890
100Base-T Physical Media Access [PMA]
Clock Recovery
The Clock Recovery block locks onto the incoming data stream,
extracts the embedded clock, and presents the data synchronized
to the recovered clock. This process produces signals with
very low timing uncertainty and noise (jitter).
In the event that the PLL is unable to lock on to the receive
signal, it generates a not locked signal. The transmit clock
synthesizer provides a center frequency reference for operation
of the clock recovery circuit in the absence of data. The
receive signal detected and not locked signals are both
used by the logic which monitors the receive channel for
errors.
Transmit Clock Synthesizer
The
ICS1890
synthesizes the transmit clock using a PLL to
produce 2.5 MHz for 10Base-T and 25 MHz for 100Base-TX.
Internal clock frequencies of 20 MHz and 125 MHz are also
generated. This allows the use of a low cost 25 MHz crystal
oscillator for a low jitter reference frequency.
Signal Detector
The
ICS1890
Signal Detector is part of the clock recovery
PLL. It detects a Receive Signal Error if no receive signal is
received and detects a PLL Lock Error if the PLL is unable to
lock on to the receive channel signal. A receive channel error
is defined as the loss of receive signal or the loss of PLL lock.
Remote Fault Signaling
Remote fault signaling allows a
link partner to signal receive channel errors on its transmit
channel. It is then possible to establish the integrity of both
the transmit and receive channels. If auto-negotiation is enabled,
the
ICS1890
monitors the receive channel for Fast Link
Pulses or Normal Link Pulses. If an error is detected, the
remote error condition is signaled.
The
ICS1890
is able to report a remote fault detected by its
link partner. When the link partner is an
ICS1890
, a remote
fault will be signaled when it detects a receive signal error. The
definition of a remote fault for a non-
ICS1890
link partner is
undefined, but generally will mean that there is a problem with
the integrity of the link partners receive channel.
相關PDF資料
PDF描述
ICX055ALA AREA CCD IMAGE ARRAY
ICX055BLA Optoelectronic
ICX056AK AREA CCD IMAGE ARRAY
ICX056AKB AREA CCD IMAGE ARRAY
ICX057AK AREA CCD IMAGE ARRAY
相關代理商/技術參數
參數描述
ICSXXXXYFLFT 制造商:ICS 制造商全稱:ICS 功能描述:System Clock Chip for ATI RS400 P4TM-based Systems
ICSXXXXYGLFT 制造商:ICS 制造商全稱:ICS 功能描述:System Clock Chip for ATI RS400 P4TM-based Systems
IC-SY WK1D 制造商:LASER COMPONENTS 功能描述:DEVELOPMENT KIT LD DRIVER
ICT-075-A-10.0-G 制造商:Interconnect Devices Inc (IDI) 功能描述:contact probe, .075' CTR 3 amp, concave 90 deg
ICT-075-A-10-G S/C 功能描述:觸點探頭 .075’ CTR 3AMP PROBE HEADED 90 DEG CNCAVE RoHS:否 制造商:IDI 類型:Probes 尖端類型:Spherical Radius 長度:8.26 mm 電流額定值:10 A 彈力:2.3 oz 行程:1.52 mm 系列:101050
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*