參數資料
型號： CL-PS7110
廠商： Cirrus Logic, Inc.
英文描述： Low-Power System-on-a-Chip
中文描述： 低功耗系統級晶片
文件頁數： 72/82頁
文件大?。?/td> 1101K
代理商： CL-PS7110
DATA BOOK v1.5
May 1997
72
ELECTRICAL SPECIFICATIONS
CL-PS7110
Low-Power System-on-a-Chip
4.6.4
Pin Test Mode
This mode is selected by NTEST0 = 0, NTEST1 = 0, Latched NURESET = 1.
This test mode allows a simple ICT tester to check if all pins on the CL-PS7110 are correctly soldered to
the PCB. This mode does this by back-driving each pin in turn, and checking the response on one desig-
nated pin (the COL7 pin).
A parity bit is generated and output on the COL7 pin; this parity bit is the XOR of the input from every
CL-PS7110 signal pin except for the two test inputs. The input pad of each signal is fed into this XOR gate
regardless of signal type. Externally driving (back-driving) any signal pin from its reset state causes a tran-
sition of the COL7 pin.
Table 4-6
defines the rest state for all CL-PS7110 output pins. As Pin Test mode
is entered, the states of all CL-PS7110 inputs are latched, and forced back out on the pins. Thus ALL pins
(except the two test pins) are configured as outputs in this mode. This ensures only a ‘good’ solder joint
passes the pin test. When not in Pin Test mode, the XOR chain is disabled and cannot toggle to save
power.
It is essential in Pin Test mode that the NURESET pin is kept in the default (HIGH) state except when it
is being tested itself. This ensures that NPOR can be safely included in the pin test chain without affecting
the test mode.
a
These inputs are INVERTED before being passed to the PLL to ensure that the default state of the port
(all ‘0’) maps onto the correct default state of the PLL (TSEL = 1, XTALON = 1, PLLON = 1, D0 = 0, D1
= 1, PLLBP = 0). This state produces the correct frequencies as shown in
Table 4-6
. Any other combina-
tions are for testing the oscillator and PLL and should not be used in the circuit.
Table 4-6.
Oscillator and PLL Test Mode Signals
Signal
I/O
Pin
Function
TSEL
a
I
PA5
PLL test select
XTALON
a
I
PA4
Enable to oscillator circuit
PLLON
a
I
PA3
Enable to PLL circuit
DN0
I
PA2
Selects other frequencies from PLL with DN0
DN1
a
I
PA1
Selects other frequencies from PLL with DN1
PLLBP
I
PA0
Bypasses PLL
RTCCLK
O
COL0
Output of RTC oscillator
CLK1
O
COL1
1-Hz clock from RTC divide chain
OSC36
O
COL2
36-MHz PLL main output
CLK576K
O
COL4
576 kHz divided-down as above
VTEST
O
COL5
Analog output of VCO loop filter
VREF
O
COL6
VCO output for test
相關PDF資料
PDF描述
CL-PS7111 Low-Power System-on-a-Chip
CL-PS7111-VC-A Low-Power System-on-a-Chip
CL-PS7500FE System-on-a Chip for Internet Appliance
CL-SH8665 Integrated ATA Drive microcontroller(集成ATA驅動微控制器)
CL1431 Precision Adjustable Shunt Reference
相關代理商/技術參數
參數描述
CL-PS7110-VC-A 制造商:CIRRUS 制造商全稱:Cirrus Logic 功能描述:Low-Power System-on-a-Chip
CL-PS7110-VI-A 制造商:CIRRUS 制造商全稱:Cirrus Logic 功能描述:Low-Power System-on-a-Chip
CL-PS7111 制造商:CIRRUS 制造商全稱:Cirrus Logic 功能描述:Low-Power System-on-a-Chip
CL-PS7111(208LQFP) 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Logic IC
CL-PS7111(256PBGA) 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Logic IC
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*