![](http://datasheet.mmic.net.cn/Exar-Corporation/XRT86VL30IV-F_datasheet_100157/XRT86VL30IV-F_129.png)
XRT86VL30
124
REV. 1.0.1
SINGLE T1/E1/J1 FRAMER/LIU COMBO - T1 REGISTER DESCRIPTION
TABLE 110: RXLOS/CRC INTERRUPT STATUS REGISTER (RLCISR)
HEX ADDRESS: 0X0B12
BIT
FUNCTION
TYPE
DEFAULT
DESCRIPTION-OPERATION
7-4
-
Reserved
3
RxLOSINT
RUR/
WC
0
Change in Receive LOS condition Interrupt Status
This bit indicates whether or not the “Change in Receive LOS condi-
tion” interrupt has occurred since the last read of this register.
If this interrupt is enabled, then the Receive T1 Framer block will
generate an interrupt in response to either one of the following
conditions.
1. Whenever the Receive T1 Framer block declares the Receive
LOS condition.
2. Whenever the Receive T1 Framer block clears the Receive
LOS condition.
0 = Indicates that the “Change in Receive LOS Condition” interrupt
has not occurred since the last read of this register.
1 = Indicates that the “Change in Receive LOS Condition” interrupt
has occurred since the last read of this register.
2-0
Reserved
-
TABLE 111: RXLOS/CRC INTERRUPT ENABLE REGISTER (RLCIER)
HEX ADDRESS: 0X0B13
BIT
FUNCTION
TYPE
DEFAULT
DESCRIPTION-OPERATION
3
RxLOS_ENB
R/W
0
Change in Receive LOS Condition Interrupt Enable
This bit enables the “Change in Receive LOS Condition” interrupt.
0 = Enables “Change in Receive LOS Condition” Interrupt.
1 = Disables “Change in Receive LOS Condition” Interrupt.
2-0
-
Reserved