
XRT72L71
á
DS3 ATM UNI/CLEAR CHANNEL FRAMER
REV. 1.1.0
84
TABLE 94: RX CP USER FILTER CELL MASK HEADER BYTE-2
REGISTER 93
RX CP USER FILTER CELL MASK HEADER BYTE-2
HEX ADDRESS: 0X5D
BIT
FUNCTION
TYPE
DEFAULT
DESCRIPTION-OPERATION
7-0
Rx User Cell Filter Mask 2
R/W
0xFF
This register, along with the “Rx User Cell Pattern - 2” Register permits the
user to define “User Cell Filtering” criteria for Header byte 2.
Any “1” in this register, configures the Receive Cell Processor to make the
comparison between the corresponding bit-field within Header byte 2 and
the contents of the “Rx User Cell Pattern - 2” register.
Any “0” in this register, configures the Receive Cell Processor to NOT per-
form this comparison:
NOTE: This register is only active if the XRT72L71 has been configured to
operate in the “ATM UNI” Mode.
TABLE 95: RX CP USER CELL FILTER MASK HEADER BYTE-3
REGISTER 94
RX CP USER CELL FILTER MASK HEADER BYTE-3
HEX ADDRESS: 0X5E
BIT
FUNCTION
TYPE
DEFAULT
DESCRIPTION-OPERATION
7-0
Rx User Cell Filter Mask 3
R/W
0xFF
This register, along with the “Rx User Cell Pattern - 3” Register permits the
user to define “User Cell Filtering” criteria for Header byte 3.
Any “1” in this register, configures the Receive Cell Processor to make the
comparison between the corresponding bit-field within Header byte 3 and
the contents of the “Rx User Cell Pattern - 3” register.
Any “0” in this register, configures the Receive Cell Processor to NOT per-
form this comparison:
NOTE: This register is only active if the XRT72L71 has been configured to
operate in the “ATM UNI” Mode.
TABLE 96: RX CP USER CELL FILTER MASK HEADER BYTE-4
REGISTER 95
RX CP USER CELL FILTER MASK HEADER BYTE-4
HEX ADDRESS: 0X5F
BIT
FUNCTION
TYPE
DEFAULT
DESCRIPTION-OPERATION
7-0
Rx User Cell Filter Mask 4
R/W
0xFF
This register, along with the “Rx User Cell Pattern - 1” Register permits the
user to define “User Cell Filtering” criteria for Header byte 1.
Any “1” in this register, configures the Receive Cell Processor to make the
comparison between the corresponding bit-field within Header byte 1 and
the contents of the “Rx User Cell Pattern - 1” register.
Any “0” in this register, configures the Receive Cell Processor to NOT per-
form this comparison:
NOTE: This register is only active if the XRT72L71 has been configured to
operate in the “ATM UNI” Mode.