參數資料
型號: MC68HC05JB4DWR2
廠商: MOTOROLA INC
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 3 MHz, MICROCONTROLLER, PDSO28
封裝: SOIC-28
文件頁數: 87/134頁
文件大?。?/td> 1305K
代理商: MC68HC05JB4DWR2
GENERAL RELEASE SPECIFICATION
February 24, 1999
MOTOROLA
MULTI-FUNCTION TIMER
MC68HC05JB4
8-4
REV 2
RTIF - Real Time Interrupt Flag
The RTIF is a read-only ag bit.
1 =
Set when the output of the chosen (1 of 4 selections) Real Time
Interrupt stage goes active. A TIMER Interrupt request will be
generated if RTIE is also set.
0 =
Reset by writing a logical one to the RTIF acknowledge bit, RTIFR.
Writing to the RTIF ag bit has no effect on its value. This bit is
cleared by reset.
TOFE - Timer Overow Enable
The TOFE is an enable bit that allows generation of a TIMER Interrupt upon
overow of the Timer Counter Register.
1 =
When set, the TIMER Interrupt is generated when the TOF ag bit is
set.
0 =
When cleared, no TIMER interrupt caused by TOF bit set will be
generated. This bit is cleared by reset.
RTIE - Real Time Interrupt Enable
The RTIE is an enable bit that allows generation of a TIMER Interrupt by the
RTIF bit.
1 =
When set, the TIMER Interrupt is generated when the RTIF ag bit is
set.
0 =
When cleared, no TIMER interrupt caused by RTIF bit set will be
generated. This bit is cleared by reset.
TOFR - Timer Overow Acknowledge
The TOFR is an acknowledge bit that resets the TOF ag bit. This bit is unaf-
fected by reset. Reading the TOFR will always return a logical zero.
1 =
Clears the TOF ag bit.
0 =
Does not clear the TOF ag bit.
RTIFR - Real Time Interrupt Acknowledge
The RTIFR is an acknowledge bit that resets the RTIF ag bit. This bit is unaf-
fected by reset. Reading the RTIFR will always return a logical zero.
1 =
Clears the RTIF ag bit.
0 =
Does not clear the RTIF ag bit.
8.4
OPERATION DURING STOP MODE
When STOP is exited by an external interrupt or an LVR reset or an external
RESET, the internal oscillator will resume, followed by a 128 or 4064 internal pro-
cessor oscillator stabilization delay.
8.5
COP CONSIDERATION DURING STOP MODE
In STOP mode, the clock to the Watchdog Timer is stopped and is therefore
impossible to generate COP reset when in STOP mode. The COP function will
resume 128 or 4064 cycles after exiting from STOP.
相關PDF資料
PDF描述
MC68HC705JB4DWR2 8-BIT, OTPROM, 3 MHz, MICROCONTROLLER, PDSO28
MC68HC05L11PU 8-BIT, MROM, 3.69 MHz, MICROCONTROLLER, PQFP100
MC68HC05P7P 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP28
MC68HC05SB7 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28
MC68HC705SB7 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PDSO28
相關代理商/技術參數
參數描述
MC68HC05JJ6 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification Microcontrollers
MC68HC05JJ6CDW 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification Microcontrollers
MC68HC05JJ6CDWE 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification Microcontrollers
MC68HC05JJ6CP 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification Microcontrollers
MC68HC05JJ6CPE 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification Microcontrollers