
____________________________________________________ DS34T101, DS34T102, DS34T104, DS34T108
182 of 366
SAToP/CESoPSN_Bundle[n]_cfg[127:96] 0x300+n*4
Bits
Data Element Name
R/W
Reset
Value
Description
[15]
Rx_CAS_src
R/W
None
Source of signaling towards TDM:
0 = SDRAM signaling jitter buffer
[14]
Rx_enable_reorder
R/W
None
0 = Disable reorder
1 = Enable reorder
[13]
Reserved
R/W
None
Must be set to zero
[12]
OAM_ID_in_CW
R/W
None
0 = Ignore the OAM packet indication in the control word
1 = Check the OAM packet indication in the control word
[11]
Rx_discard
R/W
None
0 = Pass through all incoming packets
1 = Discard all incoming packets
[10]
Rx_dest
R/W
None
0 = TDM
1 = CPU
[9:8]
Tx_MPLS_lables_l2tpv3_cookies
R/W
None
For MPLS:
00 = Reserved
01 = One label in the TX MPLS stack
10 = Two labels in the TX MPLS stack
11 = Three labels in the TX MPLS stack
For L2TPv3:
00 = No cookies in the TX L2TPv3 header
01 = One cookie in the TX L2TPv3 header
10 = Two cookies in the TX L2TPv3 header
11 = Reserved
[7:4]
Port_num
R/W
None
The port number which the bundle is assigned to:
0000 = Port 1, 0111=Port 8
[3:2]
Tx_VLAN_stack
00 = No VLAN tag in header
01 = One VLAN tag exists in header
10 = Two VLAN tags exist in header
11 = Reserved
Not valid for Rx. Not used by Tx AAL1 but by Ethernet
MAC transmitter block
[1]
Rx_Bundle_Identifier_valid
R/W
None
frame bundle identifier isn't found in the whole packet
classifier table, the incoming frame is handled
according to packet classifier discard switches in
1 = Rx_Bundle_Identifier entry is valid
[0]
Reserved
R/W
None
Must be set to zero
SAToP/CESoPSN_Bundle[n]_cfg[159:128] 0x400+n*4
Bits
Data Element Name
R/W
Reset
Value
Description
[31:24]
Reserved
0x00
Must be set to zero
[23]
Last_value_insertion
R/W
None
Enables the insertion of the last received timeslot value in
case packet loss was detected. This insertion is only
performed if 3 frames or less of data per timeslot is lost. If
more than 3 frames of data are lost, the insertion is not
performed and, instead, conditioning is inserted as usual).
0 = last value insertion disabled
1 = last value insertion enabled
[22]
Rx_RTP
R/W
None
0 = RTP header doesn’t exist in received packets
1 = RTP header exists in received packets
[21:20]
Rx_L2TPV3_cookies
R/W
None
For MPLS:
00 = Reserved
01 = One label in the received MPLS stack
10 = Two label in the received MPLS stack
11 = Three label in the received MPLS stack
For L2TPv3:
00 = No cookies in the received L2TPv3 header