參數資料
型號： 73S1209F-EB
廠商： Maxim Integrated Products
文件頁數： 60/123頁
文件大小： 0K
描述： BOARD EVAL 73S1209F DOC/CD CABLE
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 1
主要目的： *
嵌入式： *
已用 IC / 零件： *
主要屬性： *
次要屬性： *
已供物品： 板，線纜，CD，電源
DS_1209F_004
73S1209F Data Sheet
Rev. 1.2
41
Miscellaneous Control Register 0 (MISCtl0): 0xFFF1
0x00
Transmit and receive (TX and RX) pin selection and loop back test configuration are set up via this register.
Table 37: The MISCtl0 Register
MSB
LSB
PWRDN
–
SLPBK
SSEL
Bit
Symbol
Function
MISCtl0.7
PWRDN
This bit places the 73S1209F into a power down state.
MISCtl0.6
–
MISCtl0.5
–
MISCtl0.4
–
MISCtl0.3
–
MISCtl0.2
–
MISCtl0.1
SLPBK
1 = UART loop back testing mode. The pins TXD and RXD are to be
connected together externally (with SLPBK =1) and therefore:
SLPBK SSEL
Mode
0
normal using Serial_0
0
1
normal using Serial_1
1
0
Serial_0 TX feeds Serial_1 RX
1
Serial_1 TX feeds Serial_0 RX
MISCtl0.0
SSEL
Selects either Serial_1 if set =1 or Serial_0 if set = 0 to be connected
to RXD and TXD pins.
1.7.4.1
Serial Interface 0
The Serial Interface 0 can operate in four modes:
Mode 0
Pin RX serves as input and output. TX outputs the shift clock. Eight bits are transmitted with the LSB
first. The baud rate is fixed at 1/12 of the crystal frequency. Reception is initialized in Mode 0 by
setting the flags in S0CON as follows: RI0 = 0 and REN0 = 1. In other modes, a start bit when REN0
= 1 starts receiving serial data.
Mode 1
Pin RX serves as input, and TX serves as serial output. No external shift clock is used, 10 bits are
transmitted: a start bit (always 0), 8 data bits (LSB first), and a stop bit (always 1). On receive, a start
bit synchronizes the transmission, 8 data bits are available by reading S0BUF, and stop bit sets the
flag RB80 in the Special Function Register S0CON. In mode 1 either internal baud rate generator or
timer 1 can be use to specify baud rate.
Mode 2
This mode is similar to Mode 1, with two differences. The baud rate is fixed at 1/32 or 1/64 of
oscillator frequency and 11 bits are transmitted or received: a start bit (0), 8 data bits (LSB first), a
programmable 9th bit, and a stop bit (1). The 9th bit can be used to control the parity of the serial
interface: at transmission, bit TB80 in S0CON is output as the 9th bit, and at receive, the 9th bit
affects RB80 in Special Function Register S0CON.
Mode 3
The only difference between Mode 2 and Mode 3 is that in Mode 3 either internal baud rate generator
or timer 1 can be use to specify baud rate.
The S0BUF register is used to read/write data to/from the serial 0 interface.
相關PDF資料
PDF描述
EBC25DTAS CONN EDGECARD 50POS R/A .100 SLD
DS8005-KIT# EVALUATION KIT FOR DS8005
UVR1A153MHD CAP ALUM 15000UF 10V 20% RADIAL
NR3012T150M INDUCTOR 15UH 20% SMD
PLE0E102MDO1 CAP ALUM 1000UF 2.5V 20% RADIAL
相關代理商/技術參數
參數描述
73S1209F-IM44 DK 制造商:Maxim Integrated Products 功能描述:Development Boards & Kits - 8051 73S1209F Dev Kit Eval Bd Ice Cable Cd
73S1209F-IM44 EB 制造商:Maxim Integrated Products 功能描述:Development Boards & Kits - 8051 73S1209F Eval Brd Eval Bd Doc Cd Cable
73S1209F-IM68 DK 制造商:Maxim Integrated Products 功能描述:Development Boards & Kits - 8051 73S1209F Dev Kit Eval Bd Ice Cable Cd
73S1209F-IM68 EB 制造商:Maxim Integrated Products 功能描述:Development Boards & Kits - 8051 73S1209F Eval Brd Doc Cd Cable
73S1210F 制造商:TERIDIAN 制造商全稱:TERIDIAN 功能描述:Self-Contained Smart Card Reader with PINpad and Power Management
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*