參數資料
型號： MC92600
廠商： Motorola, Inc.
英文描述： High-speed, Full-duplex, Serial Data Interface(高速全雙工串行數據接口)
中文描述： 高速，全雙工，串行數據接口（高速全雙工串行數據接口）
文件頁數： 32/82頁
文件大小： 1056K
代理商： MC92600
3-10
MC92600 WarpLink Quad Users Manual
Device Operations
overrun is imminent. However, the idle is dropped only if add/delete idle (ADI) mode is
enabled by setting ADIE high. When enabled, idle patterns are dropped to maintain
synchronization. If sufTcient idle patterns are not available to drop, receiver overrun may
occur. When overrun occurs, the overrun/underrun error is reported as described in
Section 3.7, òReceiver Interface Error Codes,ó for one byte clock period. Overrun error is
also reported if ADI mode is disabled and overrun occurs, even if idles are available to drop.
A sufTcient number of idles must be transmitted to guard against overrun. The frequency
of idles can be computed based upon the maximum frequency offset between transmitter
and receiver in the system. The number of bytes (characters) that can be transmitted
between idles is:
(10
6
/ N) - 1 bytes
where:
N is the frequency offset in ppm.
In an underrun situation, a byte of data needs to be added to maintain synchronization
between the clock domains. The receiver interface adds an idle byte when underrun is
imminent. However, the idle is added only if add/delete idle (ADI) mode is enabled by
asserting ADIE. If ADI mode is disabled and underrun occurs, the overrun/underrun error
is reported as described in Section 3.7 for one byte clock period.
Data is timed to the rising edge of the reference clock signal except in double data rate mode
where data is timed to the rising and falling edges of the reference clock.
3.5 Device Operations
The WarpLink receiver is comprised of several devices and operations that are described in
the following sections.
3.5.1 Receiver Input AmpliTer
The input ampliTer connects directly to the link input pads RLINK_n_P and RLINK_n_N.
It is a differential ampliTer with an integrated analog multiplexer for loop-back testing.
Link termination resistors are integrated with the ampliTer. The termination resistance is
programmable to be 100
W
differential or 150
W
differential through the MEDIA signal.
Termination resistance is 100
W
when MEDIA is low and 150
W
when MEDIA is high.
The input ampliTer facilitates a loop-back path for production and in-system testing. When
the WarpLink Quad is in loop-back mode (LBE is high), the input ampliTer selects the
loop-back differential input signals and ignores the state on the RLINK_n_P and
RLINK_n_N signals. This allows in-system loop-back BIST independent of the current
input state. See Chapter 5 for more information on test modes.
相關PDF資料
PDF描述
MC9S12DB128B MC9S12DT128B
MC9S12DB128BCFU MC9S12DT128B
MC9S12DB128BCPV MC9S12DT128B
MC9S12DB128BMFU MC9S12DT128B
MC9S12DB128BMPV MC9S12DT128B
相關代理商/技術參數
參數描述
MC92600JUB 功能描述:IC SERDES QUAD 1.25GBAUD 217PBGA RoHS:否 類別:集成電路 (IC) >> 接口 - 串行器，解串行器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 功能:解串器 數據速率:2.5Gbps 輸入類型:串行 輸出類型:并聯 輸入數:- 輸出數:24 電源電壓:1.8 V ~ 3.3 V 工作溫度:-40°C ~ 105°C 安裝類型:表面貼裝 封裝/外殼:64-TQFP 裸露焊盤 供應商設備封裝:64-TQFP-EP（10x10） 包裝:管件
MC92600VMB 制造商:Freescale Semiconductor 功能描述:
MC92603VF 功能描述:IC TXRX ETH QUAD GIG 256-MAPBGA RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:25 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:4.5 V ~ 5.5 V 安裝類型:通孔 封裝/外殼:16-DIP（0.300"，7.62mm） 供應商設備封裝:16-PDIP 包裝:管件
MC92603VM 功能描述:IC ETH TXRX QUAD GIG 256-MAPBGA RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 標準包裝:1,000 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:16-SOIC 包裝:帶卷 (TR)
MC92604VM 功能描述:IC ETH TXRX DUAL GIG 196-MAPBGA RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 標準包裝:1,000 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:16-SOIC 包裝:帶卷 (TR)
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*