
GF9331 Data Sheet
Proprietary and Confidential
18303 - 4
June 2004
14 of 31
3.2.2.4 V_OFFSET_ODD
This parameter defines the number of lines from the V_IN pin EAV transition to the
end of the odd active video field region. This parameter has a maximum value of
255. Eight bits within the host interface are dedicated to this parameter. This
parameter has been added to accommodate all video decoders which output
non-standard timing for the V _IN signal. See
Figure 3-2: V_Offset Definition
.
Figure 3-2: V_Offset Definition
3.2.2.5 V_OFFSET_EVEN
This parameter defines the number of lines from the V_IN pin EAV transition to the
end of the even active video field region. This parameter has a maximum value of
255. Eight bits within the host interface are dedicated to this parameter. This
parameter has been added to accommodate all video decoders which output
non-standard timing for the V
_IN
signal. See
Figure 3-2: V_Offset Definition
.
3.2.2.6 F_OFFSET_ODD
This parameter defines the number of lines from the F_IN pin EAV transition to the
vertical blanking interval following the odd field. This parameter has a maximum
value of 255. Eight bits within the host interface are dedicated to this parameter.
This parameter has been added to accommodate all video decoders which output
non-standard timing for the F_IN signal. See
Figure 3-1: Generic Input Format
Definition
.
3.2.2.7 F_OFFSET_EVEN
This parameter defines the number of lines from the F_IN pin EAV transition to the
vertical blanking interval following the even field. This parameter has a maximum value
of 255. Eight bits within
the host interface are dedicated to this parameter. This
parameter has been added to accommodate all video decoders which output
non-standard timing for the F_IN signal. See
Figure 3-1: Generic Input Format
Definition
.
3.2.2.8 H_POLARITY
This parameter defines the polarity of the H_IN pin. With H_POLARITY set LOW,
a falling transition on the H_IN pin indicates the end of active video. With
H_POLARITY set HIGH, a rising transition on the H
_IN
pin indicates the end of
active video. One bit within the host interface is dedicated to this parameter.
H_IN
Vertical Blanking Region
V_IN
V_OFFSET_ODD/EVEN
Last active line