參數資料
型號: XRT73L03BIV
廠商: Exar Corporation
文件頁數: 2/61頁
文件大小: 0K
描述: IC LIU E3/DS3/STS-1 3CH 120LQFP
標準包裝: 72
類型: 線路接口裝置(LIU)
驅動器/接收器數: 3/3
規程: DS3,E3,STS-1
電源電壓: 3.135 V ~ 3.465 V
安裝類型: 表面貼裝
封裝/外殼: 120-LQFP
供應商設備封裝: 120-LQFP(14x20)
包裝: 托盤
XRT73L03B
3 CHANNEL DS3/E3/STS-1 LINE INTERFACE UNIT
REV. 1.0.1
8
64
SDO/(E3_0)
I/O
Serial Data Output from the Microprocessor Serial Interface/
E3_Mode Select - Channel 0:
The function of this pin depends on whether the XRT73L03B is operating
in the HOST Mode or in the Hardware Mode.
HOST Mode Operation - Serial Data Output for the Microprocessor
Serial Interface:
This pin serially outputs the contents of the specified Command Register
during Read Operations. The data is updated on the falling edge of the
SClk input signal and tri-stated upon completion of data transfer.
Hardware Mode Operation - E3 Mode Select - Channel 0:
This input pin is used to configure Channel 0 in the XRT73L03B to oper-
ate in the E3 or STS/DS3 Modes. Setting this input pin to "High" config-
ures Channel 0 to operate in the E3 Mode. Setting this input pin to "Low"
configures Channel 0 to operate in either the DS3 or STS-1 Modes,
depending upon the state of the STS-1/DS3_0 input pin.
NOTE: This pin is internally pulled “Low” when XRT73L03B is in the
Hardware Mode.
92
102
E3_1
E3_2
I
E3 Select Input - Channel (n):
A "High" on this pin configures Channel (n) of the XRT73L03B to operate
in the E3 Mode.
A "Low" on this pin configures Channel (n) of the XRT73L03B to check
the state of the STS-1/DS3_(n) input pin
NOTE: This input pin is ignored and should be connected to GND if the
XRT73L03B is operating in the HOST Mode.
65
95
101
STS-1/DS3_0
STS-1/DS3_1
STS-1/DS3_2
I
STS-1/DS3 Select Input - Channel (n):
“High” for STS-1 and “Low” for DS3 Operation.
The XRT73L03B ignores this pin if the E3_(n) pin is set to "1".
This input pin is ignored if the XRT73L03B is operating in the HOST
Mode.
NOTE: This pin should be tied to GND if the XRT73L03B is going to be
operating in the HOST Mode, (internally pulled-down).
42
HOST/(HW)I
HOST/Hardware Mode Select:
This input pin is used to enable or disable the Microprocessor Serial
Interface (e.g., consisting of the SDI, SDO, SClk, and CS pins).
Setting this input pin "High" enables the Microprocessor Serial Interface
(e.g. configures the XRT73L03B to operate in the HOST Mode). In this
mode, configure the XRT73L03B via the Microprocessor Serial Interface.
When the XRT73L03B is operating in the HOST Mode, then it ignores
the states of many of the discrete input pins.
Setting this input pin "Low" disables the Microprocessor Serial Interface
(e.g., configures the XRT73L03B to operate in the Hardware Mode). In
this mode, many of the external input control pins are functional.
OPERATING MODE SELECT
PIN #NAME
TYPE
DESCRIPTION
相關PDF資料
PDF描述
IDT72825LB15PF IC FIFO SYNC DL 1024X18 128TQFP
MS27472T12F35P CONN RCPT 22POS WALL MNT W/PINS
IDT72V3650L6PFG8 IC FIFO SS 2048X36 6NS 128-TQFP
MS3100A28-2P CONN RCPT 14POS WALL MNT W/PINS
MS27473E10F35SA CONN PLUG 13POS STRAIGHT W/SCKT
相關代理商/技術參數
參數描述
XRT73L03BIV-F 功能描述:外圍驅動器與原件 - PCI RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
XRT73L03IV 制造商:EXAR 制造商全稱:EXAR 功能描述:3 CHANNEL E3/DS3/STS-1 LINE INTERFCE UNIT
XRT73L03IVS 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC
XRT73L04A 制造商:EXAR 制造商全稱:EXAR 功能描述:4 CHANNEL DS3/E3/STS-1 LINE INTERFACE UNIT
XRT73L04AIV 制造商:EXAR 制造商全稱:EXAR 功能描述:4 CHANNEL DS3/E3/STS-1 LINE INTERFACE UNIT