
TCM4400E
GSM/DCS BASEBAND AND VOICE A/D
AND D/A RF INTERFACE CIRCUIT
SLWS082A – JULY 1999 – REVISED MARCH 2000
55
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
PRINCIPLES OF OPERATION
auxiliary functions control register 1
The bit values in the auxiliary functions control register 1 resets the APC generator or the AFC modulator, selects
the A/D counter input, and selects the AFC sampling frequency. This is shown in Table 24.
Table 24. AUX Functions Control Register 1
ááááááááááááááááááááááááááááááá
ááááááááááááááááááááááááááááááá
áááááááááááááááááááááá
ááááááááááááááááá
ARST:
Reset of the digital parts for the auxiliary function (APC generator and AFC modulator).
This is not a toggle bit and has to be set to 0 to remove the reset condition.
áááááááááááá
áááááá
ááááááá
ááááááááá
ááááááááááááááááááááááááááááá
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
ADCCH (0–2):
Selection of the input of the A/D converter; see Table 25.
ááááááááááááááááá
ááááááááááááááááá
ááááááááááááááááá
ááááááááááááááááá
ááááááááááááááááá
ááááááááááááááááá
ááááááááááááááááá
ADCCH2
ADCCH1
ADCCH0
A/D CONVERTER INPUT SELECTION
ááááááááááááááááá
0
0
0
A/D conversion of ADIN1
ááááááááááááááááá
1
0
1
A/D conversion of ADIN5
1
1
0
A/D conversion of ADIN5
1
1
1
A/D conversion of ADIN5
AFCCK (0–1): Selection of the sampling frequency of the AFC, see Table 26.
áááááááááááááááááá
áááááááááááááááááá
áááááááááááááááááá
áááááááááááááááááá
áááááááááááááááááá
If cleared to 0, the AFC block is powered down under the control of the PWRDN terminal. If
this bit is set to 1, the power down is only controlled by bit AFCPD.
áááááááááááááááááá
AFCPN:
AFCPD:
This bit is functionally associated and paired with bit AFCPN. When the AFCPN bit is 1, the
AFC block is active. When the AFCPD bit is set to 1, the AFCPD block is in power-down
mode.
ADCPN:
If cleared to 0, the auxiliary ADC block is powered down when under the control of PWRDN.
If this bit is set to 1, the power down is only controlled by bit ADCPD.
ADCPD:
This bit is functionally associated and paired with bit ADCPN. When the ADCPN bit is set to
1, an auxiliary ADC is active. When the ADCPD bit is set to 1, the auxiliary ADCPD is in
power-down mode.