12
Modem Status Page
TRANSMIT READY (TX_RDY) CR7<7:7>
This status bit indicates the status of the TX_RDY output pin.
It is only used when the Preamble/Header is generated
internally within the HSP3824.
ANTENNA CR7<6:6>
This status bit indicates the antenna selected by the device
(status of the ANTSEL pin).
CLEAR CHANNEL ASSESSMENT (CCA) CR7<5:5>
This status bit indicates the status of the Clear Channel
Assessment output pin.
CARRIER SENSE (CRS) CR7<4:4>
This status bit indicates the status of Carrier Sense (or PN
lock).
RSSI VS THRESHOLD CR7<3:3>
This status bit indicates whether the RSSI signal is above or
below threshold (or energy detect (ED)).
MAC DATA READY (MD_RDY) CR7<2:2>
This status bit indicates the status of the MD_RDY output
pin. It signals that a valid Preamble/Header has been
received and that the next available bit on the RXD bus will
be the first data packet bit.
TRANSMIT POWER ENABLE (TX_PE) CR7<1:1>
This status bit indicates whether the external device has
acknowledged that the channel is clear for transmission (or
status of the TX_PE pin).
VALID CRC16 CR7<0:0>
This status bit indicates whether a valid CRC16 has been
calculated for the Header information. The CRC16 does not
cover the preamble bits.
PACKET STATUS CR8<7:7>
This status bit indicates whether a valid packet has been
received. This is meaningful only when the device operates
under the full protocol mode.
START FRAME DELIMITER SEARCH TIMER CR8<6:6>
This status bit indicates the status of the SFD search timer.
MODULATION TYPE CR8<5:5>
This status bit indicates the modulation type for the data
packet. Preamble and Header data are always DBPSK, but
the data can be either DBPSK or DQPSK.
PREAMBLE/HEADER
MODEM STATUS
SIGNAL STATUS
THRESHOLD SETTINGS
MODEM CONFIGURATION
I/0 CONFIGURATION
TEST PORT CONFIGURATION
EXIT
DOWNLOAD
2:33 PM
BDO:
A/D CALIBRATION
IN PROCESS
COMPLETE
A
LOW
NO CARRIER
BELOW
NO DATA
NOT CLEAR
INVALID
VALID
CLEAR
DATA
ABOVE
CARRIER
HIGH
B
TX_RDY
ANTENNA
CCA
CARRIER SENSE
RSSI vs THRESHOLD
MD_RDY
TX_PE
CRC16
VALID
INVALID
FOUND
DBPSK
VALID
CLEAR
DATA
ABOVE
CARRIER
DQPSK
NOT FOUND
PACKET STATUS
SFD SEARCH TIMER
MODULATION TYPE
UNUSED BIT 4
UNUSED BIT 3
UNUSED BIT 2
UNUSED BIT 1
UNUSED BIT 0
Application Note 9615