參數資料
型號： W29GL064CT9A
廠商： WINBOND ELECTRONICS CORP
元件分類： PROM
英文描述： 64M X 1 FLASH 3V PROM, 100 ns, PBGA48
封裝： GREEN, VFBGA-48
文件頁數： 11/64頁
文件大小： 563K
代理商： W29GL064CT9A
W29GL064C
Publication Release Date: September 8, 2010
13
Preliminary - Revision A
7.2.17.3
Read Silicon Device ID Code
To verify the Silicon Device ID Codes, execute a Read Operation with VHH applied to the A9 pin and
address pins A6, A3, A2, A1, and A0 have several bit combinations to return the Winbond Device ID
codes of 7Eh, 21h or 01h, which is shown on the data bits DQ[7:0]. See Table 7-2.
7.2.17.4
Read Indicator Bit DQ7 for Security Sector High and Low Address
To verify that the Security Sector has been factory locked, execute a Read Operation with VHH applied
to A9, address pins A6, A3, and A2 are held Low, and address pins A1 and A0 are held High. If the
Security Sector has been factory locked, the code 9Ah(Highest Address Sector) or 8Ah(Lowest
Address Sector) will be shown on the data bits DQ[7:0]. Otherwise, the factory unlocked code of
1Ah(H)/0A(L) will be shown.
7.2.18 Automatic Select Operations
The Automatic Select instruction show in Table 7-13 can be executed if the device is in one of the
following modes; Read, Program Suspended, Erase-Suspended Read, or CFI. At which time the user
can issue (two unlock cycles followed by the Automatic Select instruction 90h) to enter Automatic
Select mode. Once in the Automatic Select mode, the user can query the Manufacturer ID, Device ID,
Security Sector locked status, or Sector protected status multiple times without executing the unlock
cycles and a Automatic Select instruction (90h) again.
Once in Automatic Select mode, executing a Reset instruction (F0h) will return the device back to the
valid mode from which it left when the Automatic Select mode was first executed.
Another way previously mentioned to enter Automatic Select mode is to use one of the bus operation
shown Table 7-2 in Device Bus Operation. Once the high voltage (VHH) is removed from the A9 pin,
the device will return back to the valid mode from which it left when the Automatic Select mode was
first executed.
7.2.19 Automatic Select Instruction Sequence
Accessing the manufacturer ID, device ID, and verifying whether or not secured silicon is locked and
whether or not a sector protected is the purpose of Automatic Select mode. There are four instruction
cycles that comprise the Automatic Select mode. The first two cycles are write unlock commands,
followed by the Automatic Select instruction (90h). The fourth cycle is a read cycle, and the user may
read at any address any number of times without entering another instruction sequence. To exit the
Automatic Select mode and back to read array, the Reset instruction is necessary. No other
instructions are allowed except the Reset Instruction once Automatic Select mode has been selected.
Refer to the following table for more detailed information.
Address
Data (hex)
Representation
Word
X00
01
Manufacturer ID
Byte
X00
01
Word
X01/0E/0F
227E/220C/2201
H/L
Byte
X02/1C/1E
7E/0C/01
Word
X01/0E/0F
227E/2210/2201(T)/2200(B)
Device ID
T/B
Byte
X02/1C/1E
7E/10/01(T)/00(B)
9A/1A(H)
Word
X03
8A/0A(L)
Factory locked/unlocked
9A/1A(H)
Secure Silicon
Byte
X06
8A/0A(L)
Factory locked/unlocked
Word (Sector address) X02
00/01
Unprotected/protected
Sector Protect Verify
Byte Sector address) X04
00/01
Unprotected/protected
Table 7-9
Auto Select for MFR/Device ID/Secure Silicon/Sector Protect Read
相關PDF資料
PDF描述
W948D6FBHX6G 8M X 16 DDR DRAM, 5 ns, PBGA60
WF128K32-120HC5 512K X 8 FLASH 5V PROM MODULE, 120 ns, CHIP66
WF128K32-90HM5 512K X 8 FLASH 5V PROM MODULE, 90 ns, CHIP66
WS128K32-35CJM 512K X 8 MULTI DEVICE SRAM MODULE, 35 ns, CQCC68
WS512K32F-100G2Q 2M X 8 MULTI DEVICE SRAM MODULE, 100 ns, QMA68
相關代理商/技術參數
參數描述
W29GL128C 制造商:WINBOND 制造商全稱:Winbond 功能描述:128M-BIT 3.0-VOLT PARALLEL FLASH MEMORY WITH PAGE MODE
W29GL128CH9B 功能描述:IC FLASH 128MBIT 90NS 64LFBGA RoHS:是 類別:集成電路 (IC) >> 存儲器 系列:- 標準包裝:1 系列:- 格式 - 存儲器:閃存 存儲器類型:閃存 - NAND 存儲容量:4G（256M x 16） 速度:- 接口:并聯 電源電壓:2.7 V ~ 3.6 V 工作溫度:0°C ~ 70°C 封裝/外殼:48-TFSOP（0.724"，18.40mm 寬） 供應商設備封裝:48-TSOP I 包裝:Digi-Reel® 其它名稱:557-1461-6
W29GL128CH9B TR 制造商:Winbond Electronics Corp 功能描述:IC FLASH 128MBIT 90NS 64LFBGA
W29GL128CH9T 功能描述:IC FLASH 128MBIT 90NS 56TSOP RoHS:是 類別:集成電路 (IC) >> 存儲器 系列:- 標準包裝:2,500 系列:- 格式 - 存儲器:EEPROMs - 串行 存儲器類型:EEPROM 存儲容量:1K (128 x 8) 速度:100kHz 接口:UNI/O?（單線） 電源電壓:1.8 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 封裝/外殼:8-TSSOP，8-MSOP（0.118"，3.00mm 寬） 供應商設備封裝:8-MSOP 包裝:帶卷 (TR)
W29GL128CH9T TR 制造商:Winbond Electronics Corp 功能描述:IC FLASH 128MBIT 90NS 56TSOP
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*