
[AK4683] 
MS0427-E-02 
2007/04 
- 9 - 
Analog Volume Characteristics (OPGA):
Step Size: 
+0dB 
~
 -16dB 
-16dB 
~
 -38dB 
-38dB 
~
 -50dB 
0.1 
0.1 
- 
1 
2 
4 
- 
- 
- 
dB 
dB 
dB 
Headphone-Amp Characteristics:
 DAC 
→
 HPL/HPR pins, RL=16
Ω
Output Voltage                 (0.506xHVDD) 
S/(N+D)                       (
3dBFS) 
S/N                           (A-weighted) 
Interchannel Isolation 
Interchannel Gain Mismatch 
Load Resistance 
C1 in Figure 1 
Load Capacitance 
C2 in Figure 1 
Power Supplies 
Power Supply Current 
Normal Operation  (PDN pin = “H”)          (Note 11)
AVDD1+ AVDD2    fs=48kHz, fs=96kHz 
fs=192kHz 
HVDD 
PVDD 
DVDD+TVDD       fs=48kHz           (Note 12)
fs=96kHz 
fs=192kHz 
Power-down mode (PDN pin = “L”)           (Note 13)
Note 5. Measured at LISEL/RISEL pins when the input resistor=47kohm, the feedback resistor=24kohm and input level 
=2Vrms. 
Note 6. Measured through Pre-Amp -> ADC. Input resistor=47kohm, feedback resistor=24kohm. 
Note 7. S/N measured by CCIR-ARM is 96dB(@fs=48kHz). 
Note 8. This value is the interchannel isolation between all the channels of the LIN1-6 and RIN1-6. 
Note 9. PSR is applied to AVDD, DVDD, PVDD and TVDD with 1kHz, 50mVpp. 
Note 10. S/N measured by CCIR-ARM is 102dB(@fs=48kHz). 
Note 11. C
L
=20pF, X'tal=24.576MHz, CM1-0=“10”, CM1-0=“10”, OCKS1-0="10"@48kHz,"00"@96kHz, 
"11"@192kHz. Headphone = No output. The resister network is attached to TX pin. 
Note 12. TVDD=6mA(typ@fs=48kHz), 7mA(typ@fs=96kHz), 10mA(typ@fs=192kHz). 
Note 13. In the power-down mode. RX0 input is open and all digital input pins including clock pins (MCLK2, BICKA, 
BICKB, ILRCKA, OLRCKA, BICKB pins) and RX1-3 pins are held DVSS 
1.94 
- 
- 
- 
- 
16 
- 
- 
2.43 
70 
90 
80 
0.1 
- 
- 
- 
2.92 
- 
- 
- 
0.5 
- 
30 
300 
Vpp 
dBFS 
dB 
dB 
dB 
Ω
pF 
pF 
37 
19 
7 
8 
35 
45 
55 
80 
52 
27 
10 
11 
49 
63 
77 
200 
mA  
mA 
mA  
mA 
mA 
mA 
mA 
μ
A 
+
- 
+ 
HP-Amp 
16
Ω
HPL, HPR
C1
C2
Figure 1. Headphone Amplifier output circuit