參數資料
型號: AK4648EC
廠商: Asahi Kasei Microsystems Co.,Ltd
元件分類: Codec
英文描述: Stereo CODEC with MIC/HP/SPK-AMP
中文描述: 立體聲編解碼器麥克風/惠普/胰腎聯合移植腺苷
文件頁數: 102/119頁
文件大小: 1272K
代理商: AK4648EC
[AK4648]
MS0625-E-01
2007/06
- 102 -
1.
Grounding and Power Supply Decoupling
The AK4648 requires careful attention to power supply and grounding arrangements. AVDD, DVDD, TVDD and HVDD
are usually supplied from the system’s analog supply. If AVDD, DVDD, TVDD and HVDD are supplied separately, the
power-up sequence is not critical.
PDN pin should be held to “L” upon power-up. PDN pin should be set to “H” after all power supplies are powered-up.
In case that the pop noise should be avoided at speaker output, line output, and headphone output, the AK4648 should be
operated by the following recommended power-up/down sequence.
1)
Power-up
-
PDN pin should be held to “L” upon power-up. The AK4648 should be reset by bringing PDN pin “L” for 150ns or
more.
-
In case that the power supplies are separated in two or more groups, the power supply including TVDD should be
powered ON at first. Regarding the relationship between DVDD and HVDD, the power supply including DVDD
should be powered ON prior to the power supply including HVDD.
2)
Power-down
-
Each power supplies should be powered OFF after PDN pin is set to “L”.
-
In case that the power supplies are separated in two or more groups, the power supply including TVDD should be
powered OFF at last. Regarding the relationship between DVDD and HVDD, the power supply including HVDD
should be powered OFF prior to the power supply including DVDD.
VSS1, VSS2, and VSS3 of the AK4648 should be connected to the analog ground plane. System analog ground and
digital ground should be connected together near to where the supplies are brought onto the printed circuit board.
Decoupling capacitors should be as near to the AK4648 as possible, with the small value ceramic capacitor being the
nearest.
2. Voltage Reference
VCOM is a signal ground of this chip. A 2.2
μ
F electrolytic capacitor in parallel with a 0.1
μ
F ceramic capacitor attached
to the VCOM pin eliminates the effects of high frequency noise. No load current may be drawn from the VCOM pin. All
signals, especially clocks, should be kept away from the VCOM pin in order to avoid unwanted coupling into the
AK4648.
3. Analog Inputs
The Mic, Line and MIN inputs are single-ended. The input signal range scales with nominally at 0.06 x AVDD Vpp(typ.)
@MGAIN1-0 bits = “01”, 0.03 x AVDD Vpp(typ.) @MGAIN1-0 bits = “10”, 0.015 x AVDD Vpp(typ.) @MGAIN1-0
bits = “11” or 0.6 x AVDD Vpp(typ.) @MGAIN1-0 bits = “00” for the Mic/Line input and 0.6 x AVDD Vpp (typ.) for the
MIN input, centered around the internal common voltage (0.45 x AVDD). Usually the input signal is AC coupled using a
capacitor. The cut-off frequency is fc =1/ (2
π
RC). The AK4648 can accept input voltages from VSS1 to AVDD.
4. Analog Outputs
The input data format for the DAC is 2’s complement. The output voltage is a positive full scale for 7FFFH(@16bit) and
a negative full scale for 8000H(@16bit). The ideal output is VCOM voltage for 0000H(@16bit). Stereo Line Output is
centered at 0.45 x AVDD. Headphone-Amp and Speaker-Amp outputs are centered at HVDD/2.
相關PDF資料
PDF描述
AK4650 16Bit ツヒ CODEC with MIC/HP/SPK-AMP & TSC
AK4650VG 16Bit ツヒ CODEC with MIC/HP/SPK-AMP & TSC
AK4651 16Bit ツヒ CODEC with MIC/HP/SPK-AMP
AK4651VG 16Bit ツヒ CODEC with MIC/HP/SPK-AMP
AK4665A 20-Bit Stereo CODEC with MIC/HP-AMP
相關代理商/技術參數
參數描述
AK4649 制造商:AKM 制造商全稱:AKM 功能描述:24bit Stereo CODEC with MIC/SPK-AMP
AK4649ECB 制造商:AKM 制造商全稱:AKM 功能描述:24bit Stereo CODEC with MIC/SPK-AMP
AK4649VN 功能描述:IC CODEC AUDIO 32QFN 制造商:akm semiconductor inc. 系列:- 包裝:帶卷(TR) 零件狀態:初步 類型:音頻 數據接口:I2C 分辨率(位):24 b ADC/DAC 數:1 / 1 三角積分:- 信噪比,ADC/DAC(db)(典型值):- 動態范圍,ADC/DAC(db)(典型值):- 電壓 - 電源,模擬:3 V ~ 3.6 V 電壓 - 電源,數字:3 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:32-WFQFN 裸露焊盤 供應商器件封裝:32-QFN(5x5) 標準包裝:1,000
AK4650 制造商:AKM 制造商全稱:AKM 功能描述:16Bit ツヒ CODEC with MIC/HP/SPK-AMP & TSC
AK4650VG 制造商:AKM 制造商全稱:AKM 功能描述:16Bit ツヒ CODEC with MIC/HP/SPK-AMP & TSC