SPI/I2C UART with 128-Word FIFOs Echo Suppression The MAX3107 can suppress echoe" />
參數資料
型號： MAX3107EVKIT+
廠商： Maxim Integrated Products
文件頁數： 13/52頁
文件大小： 0K
描述： EVAL KIT I2C/SPI UART MAX3107
產品培訓模塊： Obsolescence Mitigation Program
標準包裝： 1
主要目的： 接口，UART
已用 IC / 零件： MAX3107
主要屬性： 圖形用戶界面（GUI）
次要屬性： I²C & SPI 接口
已供物品： 板，線纜
SPI/I2C UART with 128-Word FIFOs
Echo Suppression
The MAX3107 can suppress echoed data, sometimes
found in half-duplex communication (e.g., RS-485 and
IrDA). If the transceiver’s receiver is not turned off while
the transceiver is transmitting, copies (echoes) are
received by the UART. The MAX3107’s receiver can
block the reception of this echoed data by enabling echo
suppression. Set MODE2[7]: EchoSuprs to 1 to enable
echo suppression.
The MAX3107 receiver can block echoes with a long
round trip delay. The transmitter can be configured
to remain enabled after the end of transmission for a
programmable period of time: the hold time delay. The
hold time delay is set by the HDplxDelay[3:0] register.
See the HDplxDelay description in the Detailed Register
Descriptions section for more information.
Auto transceiver direction control and echo suppression
can operate simultaneously.
Auto Hardware Flow Control
The MAX3107 is capable of auto hardware (RTS and
CTS) flow control without the need for host proces-
sor intervention. When AutoRTS control is enabled,
the MAX3107 automatically controls the RTS hand-
shake without the need for host processor intervention.
AutoCTS flow control separately turns the MAX3107’s
transmitter on and off based on the CTS input. AutoRTS
and AutoCTS flow control are independently enabled
through FlowCtrl[1:0].
AutoRTS Control
AutoRTS flow control ensures that the receive FIFO does
not overflow by signaling to the far-end UART to stop
data transmission. The MAX3107 does this automati-
cally by controlling RTS/CLKOUT. AutoRTS flow control
is enabled through FlowCtrl[0]: AutoRTS. The HALT and
RESUME levels determine the threshold levels at which
RTS/CLKOUT is asserted and deasserted. HALT and
Figure 10. Setup and Hold Times in Auto Transceiver Direction Control
Figure 11. Half-Duplex with Echo Suppression
TX
FIRST CHARACTER
LAST CHARACTER
RTS/CLKOUT
SETUP
HOLD
MAX3107
MAX13431
TRANSMITTER
TX
B
A
D
RX
TxFIFO
RECEIVER
ECHO
SUPPRESSION
RxFIFO
DI
RO
RE
DE
R
RTS/CLKOUT
20
Maxim Integrated
MAX3107
相關PDF資料
PDF描述
GBB22DHLT CONN EDGECARD 44POS .050 DIP SLD
CGS902U040R4C CAP ALUM 9000UF 40V SCREW
A3AAH-6436M IDC CABLE - ASC64H/AE64M/ASC64H
GBB30DHNN CONN EDGECARD 60POS .050 DIP SLD
383LX152M450B102VS CAP ALUM 1500UF 450V 20% SNAP
相關代理商/技術參數
參數描述
MAX3107EVKIT+ 功能描述:UART 接口集成電路 UART with integrated Oscillator RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX3108AEWA+ 制造商:Maxim Integrated Products 功能描述:LOW SHUTDOWN CURRENT SPI/I?C UART WITH 128-WORD FIFOS IN WLP - Rail/Tube
MAX3108AEWA+T 功能描述:UART 接口集成電路 SPI/I2C UART W/ 128 WORD FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX3108EWA+ 制造商:Maxim Integrated Products 功能描述:SPI/IAC UART WITH 128-WORD FIFOS IN WLP - Rail/Tube
MAX3108EWA+T 功能描述:IC UART RoHS:是 類別:集成電路 (IC) >> 接口 - UART（通用異步接收器/發送器） 系列:* 標準包裝:250 系列:- 特點:* 通道數:2，DUART FIFO's:16 字節 規程:RS232，RS485 電源電壓:2.25 V ~ 5.5 V 帶并行端口:- 帶自動流量控制功能:是 帶IrDA 編碼器/解碼器:是 帶故障啟動位檢測功能:是 帶調制解調器控制功能:是 帶CMOS:是 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:托盤 其它名稱:XR16L2551IM-F-ND
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*