
GL843 High Speed USB2.0 With ADF 2-in-1 Scanner Controller For 3x
2000-2006 Genesys Logic Inc. - All rights reserved.
Page 7
CHAPTER 2 FEATURES
l
Highly integrated scanner controller chip (2-in-1; Scanner Controller and USB 2.0 Interface)
l
USB 2.0 High Speed (480Mbit) compliant
l
l
Designed for sheetfed, flatbed and transparency scanners
Supports key-matrix with latch function
l
Embedded RISC CPU for scanning, run-in and diagnostic tests
l
Supports external 24Kbytes flash ROM or internal 24Kbyte mask ROM
l
Firmware download to external flash ROM
l
12MHz low frequency clock input for better EMI
l
Flexible 3.3V/5V operating voltage for I/O pads
l
Adjustable working clock of scanner controller for different usage (12M, 24M, 30M, 40M, 48M, 60MHz)
l
Supports linear or stagger CCD, such as NEC, Toshiba or Sony CCD
l
Available sensor types: 600, 1200, 2400, 3200, 3600 and 4800dpi color CIS or CCD
l
Multi-TG control for CCD (separately controls the R/G/B exposure time)
l
Shutter-control for CCD (separately controls the R/G/B exposure time)
l
Supports two scanning types: pixel-by-pixel (pixel rate), line-by-line (line rate)
l
Support 48-bits color, 16-bits gray and 1-bit line-art
l
“
True gray
”
with R, G and B weightings
l
16 bits white/dark shading and 16-to-8 bits Gamma correction
l
0.3us per pixel for color scanning under 40MHz working clock
l
0.2us per pixel for color scanning under 60MHz working clock
l
Supports LCM/LCD interface to display messages
l
Supports RS232 interface for special applications
l
Supports EEPROM (93C46) interface for special applications
l
Supports ADF (Auto-Document-Feeder) function with document, ADF and cover sensors
l
Lossless data compression
l
Lines packing for stagger CCD or R/G/B line differences
l
Fine CDS sampling adjustment to avoid the digital noise influence (8.33ns adjustment)
l
Digital average and hardware deletion for various resolutions
l
Hardware deletion for various resolutions (from 4800~1dpi with 1dpi decrement)
l
Supports 1M*16, 4M*16, 8M*16, 16M*16 and 32M*16 SDRAM
l
Supports 5 acceleration/deceleration motor tables for high speed motor moving and wall hitting protection
l
Supports controllable bipolar motor in full, half, quarter and eighth steps moving
l
Supports controllable unipolar motor in full and half steps moving
l
Supports V-reference automatic control for motor driver Ics
l
Build-in PWM control phase for unipolar motors