參數資料
型號： ARM610
廠商： Mitel Networks Corporation
英文描述： General Purpose 32-Bit Microprocessor with 4kByte Cache,Write Buffer and Memory Management Unit(通用32位微處理器（帶4K字節緩存，寫緩沖器和存儲器管理單元）)
中文描述： 通用32位微處理器4KB的高速緩存，寫緩沖器和存儲器管理單元（通用32位微處理器（帶4K的字節緩存，寫緩沖器和存儲器管理單元））
文件頁數： 140/174頁
文件大小： 694K
代理商： ARM610
Boundary-Scan Test Interface
ARM610 Data Sheet
11-6
In the SHIFT-DR state, the previously captured test data is shifted out of the BS
register via the
TDO
pin, while new test data is shifted in via the
register parallel input latch. In the UPDATE-DR state, the new test data is transferred
into the BS register parallel output latch. This data is applied immediately to the system
logic and system pins. The first INTEST vector should be clocked into the boundary-
scan register, using the SAMPLE/PRELOAD instruction, prior to selecting INTEST to
ensure that known data is applied to the system logic.
TDI
pin to the BS
Single-step operation is possible using the INTEST instruction.
11.6.7 IDCODE (1110)
The IDCODE instruction connects the device identification register (or ID register)
between
TDI
and
TDO
. The ID register is a 32-bit register that allows the manufacturer,
part number and version of a component to be determined through the TAP.
When the instruction register is loaded with the IDCODE instruction, all the boundary-
scan cells are placed in their normal (system) mode of operation.
In the CAPTURE-DR state, the device identification code (specified at the end of this
section) is captured by the ID register. In the SHIFT-DR state, the previously captured
device identification code is shifted out of the ID register via the
shifted in via the
TDI
pin into the ID register. In the UPDATE-DR state, the ID register
is unaffected.
TDO
pin, while data is
11.6.8 BYPASS (1111)
The BYPASS instruction connects a 1–bit shift register (the BYPASS register) between
TDI
and
TDO
.
When the BYPASS instruction is loaded into the instruction register, all the boundary-
scan cells are placed in their normal (system) mode of operation. This instruction has
no effect on the system pins.
In the CAPTURE-DR state, a logic 0 is captured by the bypass register. In the SHIFT-
DR state, test data is shifted into the bypass register via
delay of one
TCK
cycle. The first bit shifted out will be a zero. The bypass register is
not affected in the UPDATE-DR state.
TDI
and out via
TDO
after a
相關PDF資料
PDF描述
ARRAYS NIGHT VISION H.V. RECTIFIER DIODES & ARRAYS
ARS2540 40A GLASS PASSIVATED AVALANCHE BUTTON DIODE
AR2540 40A GLASS PASSIVATED AVALANCHE BUTTON DIODE
ARS25A 25A AUTOMOTIVE BUTTON DIODE
ARS25J 25A AUTOMOTIVE BUTTON DIODE
相關代理商/技術參數
參數描述
ARM7-009 制造商:Gravitech 功能描述:ARM7 LPC2378 W/2.8" TCH SCRN LCD BLU
ARM720T 制造商:未知廠家 制造商全稱:未知廠家 功能描述:General-purpose 32-bit Microprocessor with 8KB cache, enlarged Write buffer, and Memory Management Unit (MMU) combined in a single chip
ARM7DIMM-LPC2478 功能描述:模塊化系統 - SOM LPC2478 ARM7 DIMM Module, Rev 2.2 RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
ARM7TDI 制造商:未知廠家 制造商全稱:未知廠家 功能描述:周立功的中文ARM7TDI文檔
ARM7TDMI 制造商:未知廠家 制造商全稱:未知廠家 功能描述:general purpose 32-bit microprocessors
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*