參數資料
型號： UT1553
廠商： Electronic Theatre Controls, Inc.
英文描述： BCRTM
中文描述： BCRTM
文件頁數： 31/61頁
文件大?。?/td> 2024K
代理商： UT1553
BCRTM-37
The interrupt structure also uses three BCRTM- driven output
signals to indicate when an interrupt event occurs:
STDINTL
Standard Interrupt Level. This signal is
asserted when one or more of the events
enabled in the Standard Interrupt Enable
Register occurs. Clear the signal by resetting
the Standard Interrupt bit in the High-Priority
Interrupt Status/Reset Register.
STDINTP
Standard Interrupt Pulse. This signal is
pulsed for each occurrence of an event
enabled in the Standard Interrupt
Enable Register.
HPINT
High-Priority Interrupt. This signal is
asserted for each occurrence of an event
enabled in the High-Priority Interrupt/Enable
Register. Writing to the corresponding bit in
the High-Priority Status/Reset Register
resets it.
Interrupt Status Word Definition
All bits in the Interrupt Status Word are active high and have the following functions:
Bit
Number
Description
BIT 15
Interrupt Status Word Accessed. The BCRT always sets this bit during the DMA Write of the Interrupt.
Status Word. If the CPU resets this bit after reading the Interrupt Status Word, the bit can help the CPU determine
which entries have been acknowledged.
BIT 14
No Response Time-Out (Message Error condition). Further defines the Message Error condition to indicate that a
Response Time-Out condition has occurred.
BIT 13
(RT) Message Error (ME). Indicates the ME bit was set in the 1553 status word response.
BITs 12-8 Reserved.
BIT 7
(RT) Subaddress Event or Mode Code with Data Word Interrupt. Indicates a descriptor control word has been
accessed with either an Interrupt Upon Valid Command Received bit set or an Interrupt when Index=0 bit set (and
the Index is decremented to 0).
BIT 6
(RT) Mode Code without Data Word Interrupt. Indicates a mode code has occurred with an Interrupt When
Addressed interrupt enabled.
BIT 5
(RT) Illegal Broadcast Command. Applies to receive commands only. This bit indicates that a received command,
due to an illegal mode code or subaddress field, has been received in the broadcast mode. This does not include
invalid commands.
BIT 4
(RT) Illegal Command. This indicates that an illegal command has occurred due to an illegal mode code or
subaddress and T/R field. This does not include invalid commands.
BIT 3
(BC) Polling Comparison Match. Indicates a polling comparison interrupt.
BIT 2
(BC) Retry Fail. Indicates all the programmed retries have failed.
BIT 1
(BC, RT) Message Error. Indicates a Message Error has occurred.
BIT 0
(BC) Interrupt and Continue. This corresponds to the interrupt and continue function described in the Command
Block.
Figure 21. Interrupt Log List
ENTRY #3
ENTRY #2
ENTRY #1
TAIL POINTER
COMMAND BLOCK
INTERRUPT STATUS
POINTER REGISTER
INTERRUPT LOG LIST
POINTER
WORD
SUBADDRESS/MODE
CODE DESCRIPTOR
POINTER
相關PDF資料
PDF描述
UT23014 DUAL T1/E1 TRANSFORMERS FOR INFINEON FALC IC APPLICATIONS
UT2309L-AE3-R 3.7 A, 30 V, 0.085 ohm, P-CHANNEL, Si, POWER, MOSFET
UT5003G-S08-R 30 V, 0.0275 ohm, 2 CHANNEL, N AND P-CHANNEL, Si, POWER, MOSFET
UT54ACS04UQAH AC SERIES, HEX 1-INPUT INVERT GATE, CDFP14
UT54ACS08UQCR AC SERIES, QUAD 2-INPUT AND GATE, CDFP14
相關代理商/技術參數
參數描述
UT1553B 制造商:未知廠家 制造商全稱:未知廠家 功能描述:RTI Remote Terminal Interface
UT1553B/BCRTM-ACA 制造商:未知廠家 制造商全稱:未知廠家 功能描述:BCRTM
UT1553B/BCRTM-ACC 制造商:未知廠家 制造商全稱:未知廠家 功能描述:BCRTM
UT1553B/BCRTM-ACX 制造商:未知廠家 制造商全稱:未知廠家 功能描述:BCRTM
UT1553B/BCRTM-ACXA 制造商:未知廠家 制造商全稱:未知廠家 功能描述:BCRTM
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*