參數資料
型號: SST89E54RC-33-C-PIE
廠商: Microchip Technology
文件頁數: 18/71頁
文件大?。?/td> 0K
描述: IC MCU 8BIT 17KB FLASH 40PDIP
標準包裝: 9
系列: FlashFlex®
核心處理器: 8051
芯體尺寸: 8-位
速度: 33MHz
連通性: EBI/EMI,UART/USART
外圍設備: POR,WDT
輸入/輸出數: 32
程序存儲器容量: 16KB(16K x 8)
程序存儲器類型: 閃存
EEPROM 大小: 1K x 8
RAM 容量: 512 x 8
電壓 - 電源 (Vcc/Vdd): 4.5 V ~ 5.5 V
振蕩器型: 外部
工作溫度: 0°C ~ 70°C
封裝/外殼: 40-DIP(0.600",15.24mm)
包裝: 管件
2011 Silicon Storage Technology, Inc.
DS25088A
10/11
25
FlashFlex MCU
SST89E52RC / SST89E54RC
Data Sheet
A Microchip Technology Company
Symbol
Function
TF2
Timer 2 overflow flag set by a Timer 2 overflow and must be cleared by software. TF2
will not be set when either RCLK or TCLK = 1.
EXF2
Timer 2 external flag set when either a capture or reload is caused by a negative
transition on T2EX and EXEN2 = 1. When Timer 2 interrupt is enabled, EXF2 = 1 will
cause the CPU to vector to the Timer 2 interrupt routine. EXF2 must be cleared by
software. EXF2 does not cause an interrupt in up/down counter mode (DCEN = 1).
RCLK
Receive clock flag. When set, causes the serial port to use Timer 2 overflow pulses for
its receive clock in modes 1 and 3. RCLK = 0 causes Timer 1 overflow to be used for the
receive clock.
TCLK
Transmit clock flag. When set, causes the serial port to use Timer 2 overflow pulses for
its transmit clock in modes 1 and 3. TCLK = 0 causes Timer 1 overflow to be used for
the transmit clock.
EXEN2
Timer 2 external enable flag. When set, allows a capture or reload to occur as a result of
a negative transition on T2EX if Timer 2 is not being used to clock the serial port.
EXEN2 = 0 causes Timer 2 to ignore events at T2EX.
TR2
Start/stop control for Timer 2. A logic 1 starts the timer.
C/T2#
Timer or counter select (Timer 2)
0: Internal timer (OSC/6 in 6 clock mode, OSC/12 in 12 clock mode)
1: External event counter (falling edge triggered)
CP/RL2#
Capture/Reload flag. When set, captures will occur on negative transitions at T2EX if
EXEN2 = 1. When cleared, auto-reloads will occur either with Timer 2 overflows or
negative transitions at T2EX when EXEN2 = 1. When either RCLK = 1 or TCLK = 1, this
bit is ignored and the timer is forced to auto-reload on Timer 2 overflow.
Symbol
Function
-
Not implemented, reserved for future use.
Note: User should not write ‘1’s to reserved bits. The value read from a reserved bit is indeterminate.
T2OE
Timer 2 Output Enable bit.
DCEN
Down Count Enable bit. When set, this allows Timer 2 to be configured as an up/down
counter.
Timer/Counter 2 Control Register (T2CON)
Location
76543210
Reset
Value
C8H
TF2
EXF2
RCLK
TCLK
EXEN2
TR2
C/T2#
CP/
RL2#
00H
Timer/Counter 2 Mode Control (T2MOD)
Location
7
6
5
43210
Reset
Value
C9H
------
T2OE
DCEN
xxxxxx00b
相關PDF資料
PDF描述
SST89E58RD2-40-I-TQJE IC MCU 8BIT FLASH 44TQFP
SST89V58RD2-33-I-TQJE IC MCU 8BIT 40KB FLASH 44TQFP
SSTUB32S869BHLFT IC REGIST BUFF 14BIT DDR2 150BGA
ST16C1450CJ28-F IC UART FIFO 1B 28PLCC
ST16C2450CJ44-F IC DUART 44PLCC
相關代理商/技術參數
參數描述
SST89E54RD 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:FlashFlex MCU
SST89E54RD2 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:FlashFlex51 MCU
SST89E54RD2/RD 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:FlashFlex51 MCU
SST89E54RD2-33-C-NI 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:FlashFlex51 MCU
SST89E54RD2-33-C-NIE1 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:FlashFlex51 MCU