參數資料
型號: S1C63455D
元件分類: 微控制器/微處理器
英文描述: 4-BIT, MROM, 4.1 MHz, MICROCONTROLLER, UUC105
封裝: DIE-105
文件頁數: 86/119頁
文件大小: 865K
代理商: S1C63455D
S1C63455 TECHNICAL MANUAL
EPSON
61
CHAPTER 4: PERIPHERAL CIRCUITS AND OPERATION (Programmable Timer)
CKSEL0: Prescaler 0 source clock selection register (FFC1HD0)
CKSEL1: Prescaler 1 source clock selection register (FFC1HD1)
Selects the source clock of the prescaler.
When "1" is written: OSC3 clock
When "0" is written: OSC1 clock
Reading: Valid
The source clock for the prescaler is selected from OSC1 or OSC3. When "0" is written to the CKSEL0
register, the OSC1 clock is selected as the input clock for the prescaler 0 (for timer 0) and when "1" is
written, the OSC3 clock is selected.
Same as above, the source clock for prescaler 1 is selected by the CKSEL1 register.
When the event counter mode is selected to timer 0, the setting of the CKSEL0 register becomes invalid.
At initial reset, these registers are set to "0".
PTPS00, PTPS01: Timer 0 prescaler division ratio selection register (FFC2HD2, D3)
PTPS10, PTPS11: Timer 1 prescaler division ratio selection register (FFC3HD2, D3)
Selects the division ratio of the prescaler.
Two bits of PTPS00 and PTPS01 are the prescaler division ratio selection register for timer 0, and two bits
of PTPS10 and PTPS11 are for timer 1. The prescaler division ratios that can be set by these registers are
shown in Table 4.10.7.2.
Table 4.10.7.2 Selection of prescaler division ratio
PTPS11
PTPS01
1
0
PTPS10
PTPS00
1
0
1
0
Prescaler division ratio
Source clock / 256
Source clock / 32
Source clock / 4
Source clock / 1
When the event counter mode is selected to timer 0, the setting of the PTPS00 and PTPS01 becomes
invalid.
At initial reset, these registers are set to "0".
EVCNT: Timer 0 counter mode selection register (FFC0HD2)
Selects a counter mode for timer 0.
When "1" is written: No function (reserved)
When "0" is written: Timer mode
Reading: Valid
The counter mode for timer 0 is selected from either no function or timer mode. When "1" is written to the
EVCNT register, no function is selected and when "0" is written, the timer mode is selected.
At initial reset, this register is set to "0".
Note: The counter mode selection register EVCNT should be set to "0" when timer 0 is used as a down
counter. Otherwise it will cause malfunction.
相關PDF資料
PDF描述
S1C63458F0A0100 MICROCONTROLLER, PQFP144
S1C63466D 4-BIT, MROM, 4.1 MHz, MICROCONTROLLER, UUC140
S1C63466F 4-BIT, MROM, 4.1 MHz, MICROCONTROLLER, PQFP144
S1C63567F0A0100 MICROCONTROLLER, PQFP144
S1C63653F 4-BIT, FLASH, 4 MHz, MICROCONTROLLER, CQFP100
相關代理商/技術參數
參數描述
S1C63557D04Q000 制造商:Seiko Instruments Inc (SII) 功能描述:EPSON MCU 4BIT
S1C63567 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63616 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63632 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63653 制造商:EPSON 制造商全稱:EPSON 功能描述:CMOS 4-bit Single Chip Microcontroller