參數資料
型號: S-35390A-T8T1
元件分類: 時鐘/數據恢復及定時提取
英文描述: REAL TIME CLOCK, PDSO8
封裝: TSSOP-8
文件頁數: 43/48頁
文件大?。?/td> 542K
代理商: S-35390A-T8T1
40
EPSON
S1C88816 TECHNICAL MANUAL
5 PERIPHERAL CIRCUITS AND THEIR OPERATION (Output Ports)
Since the FOUT signal is generated asynchronously
from the register FOUTON, when the signal is
turned ON or OFF by the register settings, a hazard
of a 1/2 cycle or less is generated.
Figure 5.5.5.4 shows the output waveform of the
FOUT signal.
FOUTON
FOUT output (R34)
01
0
Fig. 5.5.5.4 Output waveform of FOUT signal
s BZ output (R50), BZ output (R51)
In order for the S1C88816 to drive an external
buzzer, the BZ signal (sound generator output) can
be output from the output port terminal R50.
Furthermore, the R51 output port terminal can be
used to output the BZ signal (BZ inverted signal).
The configuration of the output ports R50 and R51
is shown in Figure 5.5.5.5.
BZ signal
R
SQ
One-shot
time up
R50 output
Register BZSTP
Register BZON
Register BZSHT
Register R50D
R51 output
Mask option
Register R51D
Fig. 5.5.5.5 Configuration of R50 and R51
The output control for the BZ (BZ) signal is done by
the registers BZON, BZSHT and BZSTP. When you
set "1" for the BZON or BZSHT, the BZ (BZ) signal
is output from the output port terminal R50 (R51).
When "0" is set for the BZON or "1" is set for the
BZSTP, the R50 goes LOW (VSS) and the R51 goes
HIGH (VDD).
To output the BZ signal, "0" must always be set for
the data register R50D. The data register R51D does
not affect the BZ output.
The BZ (BZ) signal is generated by the sound
generator. With respect to control of frequency and
envelope, see "5.12 Sound Generator".
Since the BZ (BZ) signal is generated asynchro-
nously from the registers BZON, BZSHT and
BZSTP, when the signal is turned ON or OFF by
setting the registers, a hazard of a 1/2 cycle or less
is generated.
Figure 5.5.5.6 shows the output waveform of the BZ
(BZ) signal.
BZON/BZSHT
BZ output (R50)
BZ output (R51) *
00
1
when selected by mask option
Fig. 5.5.5.6 BZ (BZ) output waveform
s MOUT and MOUT outputs
MOUT and MOUT are the output ports dedicated
to direct driving an external piezoelectric buzzer
with the melody signal. These ports are fixed at
complementary output and cannot be set into high-
impedance state. Also data register is not available.
At initial reset, the MOUT and MOUT terminals go
HIGH.
See "5.13 Melody Generator" for melody output.
相關PDF資料
PDF描述
S-35392A-I8T1U 1 TIMER(S), REAL TIME CLOCK, PDSO8
S-35399A03-J8T2U 1 TIMER(S), REAL TIME CLOCK, PDSO8
S-35399A03-J8T2G 1 TIMER(S), REAL TIME CLOCK, PDSO8
S-35L32AEFSG REAL TIME CLOCK, PDSO10
S-4561A 16 X 60 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC166
相關代理商/技術參數
參數描述
S-35390A-T8T1G 功能描述:實時時鐘 2-Wire 1.3-5.5V RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube
S-35390A-T8T1U 功能描述:IC RTC CLK/CALENDAR I2C 8TSSOP 制造商:ablic u.s.a. inc. 系列:- 零件狀態:在售 類型:時鐘/日歷 特性:警報器,閏年 存儲容量:- 時間格式:HH:MM:SS(12/24 小時) 日期格式:YY-MM-DD-dd 接口:I2C,2 線串口 電壓 - 電源:1.3 V ~ 5.5 V 電壓 - 電源,電池:- 電流 - 計時(最大):14μA ~ 30μA @ 3V ~ 5V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-TSSOP(0.173",4.40mm 寬) 供應商器件封裝:8-TSSOP 標準包裝:1
S-35391A-I8T1U 功能描述:IC RTC CLK/CALENDAR I2C SNT-8A 制造商:ablic u.s.a. inc. 系列:- 包裝:剪切帶(CT) 零件狀態:在售 類型:時鐘/日歷 特性:警報器,閏年 存儲容量:- 時間格式:HH:MM:SS(12/24 小時) 日期格式:YY-MM-DD-dd 接口:I2C,2 線串口 電壓 - 電源:1.3 V ~ 5.5 V 電壓 - 電源,電池:- 電流 - 計時(最大):14μA ~ 30μA @ 3V ~ 5V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-SMD,扁平引線 供應商器件封裝:SNT-8A 標準包裝:1
S-35392A 制造商:SII 制造商全稱:Seiko Instruments Inc 功能描述:2-WIRE REAL-TIME CLOCK
S-35392A-I8T1G 功能描述:實時時鐘 2-wire 實時時鐘 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube