參數資料
型號: NRF9E5-EVKIT433
廠商: Electronic Theatre Controls, Inc.
英文描述: 433/868/915MHz RF Transceiver with Embedded 8051 Compatible Microcontroller and 4 Input, 10 Bit ADC
中文描述: 433/868/915MHz RF收發器與8051兼容的嵌入式微控制器和4輸入,10位ADC
文件頁數: 52/104頁
文件大?。?/td> 1436K
代理商: NRF9E5-EVKIT433
PRODUCT SPECIFICATION
nRF9E5 Single Chip Transceiver with Embedded Microcontroller and ADC
Main office: Nordic Semiconductor ASA - Vestre Rosten 81, N-7075 Tiller, Norway -Phone +4772898900 - Fax +4772898989
Revision: 1.1
Page 52 of 104
June 2004
16.3
RTC Wakeup Timer
The RTC is a simple 24 bit down counter that produces an optional interrupt and reloads
automatically when the count reaches zero. This process is initially disabled, and will be
enabled with the first write to the lower 16 bit of the timer latch. Writing the lower 16
bits of the timer latch will always be followed by a reload of the counter. Writing the
upper 8 bit of the timer latch should only be done when the timer is disabled. The
counter may be disabled again by writing a disable opcode to the control register. Both
the latch and the counter value may be read by giving the respective codes in the control
register, see description in Table 45.
This counter is used for a wakeup sometime in the future (a relative time wakeup call).
If ‘N’ is written to the counter, the first wakeup will happen from somewhere between
‘N+1’ and ‘N+2’ “TICK” from the completion of the write, thereafter a new wakeup is
issued every “N+1” "TICK" until the unit is disabled or another value is written to the
latch.
The wakeup timer is one of the sources that can generate a WDTI interrupt to the CPU.
The programmer may poll the EICON.3 flag or enable the interrupt. If the device is in a
power down state, the wakeup will force the device to exit power down regardless of the
state of EIE.4 interrupt enable.
The nRF9E5 do not provide any “absolute time functions”. Absolute time functions in
nRF9E5 can well be handled in software since the RAM is continuously powered even
when in sleep mode.
16.4
Programmable GPIO Wakeup Function
Any number of the pins in port 0 may be used as wakeup signals for the nRF9E5. The
device may be programmed to react on either rising or falling or both edges of each pin
individually. Additionally each pin is equipped with a programmable “filter” that can be
used for glitch suppression.
DEBOUNCE
[1:0]
EDGE
[3:2]
WWCON
CKLF
P0x
Wakeup P0x
Figure 15 Wakeup filter, each pin for GPIO wakeup function.
The debounce act as a low pass filter. The input has to be stable for a number of clock
pulses given for the corresponding change to appear on the output. Edge triggers on
either positive, negative or both edges. The edge delay is 2 clock cycles. Please see
Table 44 and Table 47 for filter configuration.
相關PDF資料
PDF描述
NRF9E5-EVKIT915 433/868/915MHz RF Transceiver with Embedded 8051 Compatible Microcontroller and 4 Input, 10 Bit ADC
NRF9E5IC 433/868/915MHz RF Transceiver with Embedded 8051 Compatible Microcontroller and 4 Input, 10 Bit ADC
NRN9S104JTS SINGLE-IN-LINE SIP RESISTOR NETWORKS CONFORMAL COATED LOW PROFILE
NRN9xxx SINGLE-IN-LINE SIP RESISTOR NETWORKS CONFORMAL COATED LOW PROFILE
NRN13xxx SINGLE-IN-LINE SIP RESISTOR NETWORKS CONFORMAL COATED LOW PROFILE
相關代理商/技術參數
參數描述
nRF9E5-EVKIT-433 功能描述:射頻模塊 NRF9E5 EVAL KIT 433MHZ RoHS:否 制造商:Linx Technologies 產品:Transceiver Modules 頻帶:902 MHz to 928 MHz 輸出功率:- 15.5 dBm to + 12.5 dBm 接口類型:UART 工作電源電壓:- 0.3 VDC to + 5.5 VDC 傳輸供電電流:38.1 mA 接收供電電流:22.7 mA 天線連接器類型:U.FL 最大工作溫度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm
NRF9E5-EVKIT868 制造商:未知廠家 制造商全稱:未知廠家 功能描述:433/868/915MHz RF Transceiver with Embedded 8051 Compatible Microcontroller and 4 Input, 10 Bit ADC
nRF9E5-EVKIT-868/915 功能描述:射頻開發工具 NRF9E5 EVAL KIT 868/915 RoHS:否 制造商:Taiyo Yuden 產品:Wireless Modules 類型:Wireless Audio 工具用于評估:WYSAAVDX7 頻率: 工作電源電壓:3.4 V to 5.5 V
NRF9E5-EVKIT915 制造商:未知廠家 制造商全稱:未知廠家 功能描述:433/868/915MHz RF Transceiver with Embedded 8051 Compatible Microcontroller and 4 Input, 10 Bit ADC
NRF9E5IC 制造商:未知廠家 制造商全稱:未知廠家 功能描述:433/868/915MHz RF Transceiver with Embedded 8051 Compatible Microcontroller and 4 Input, 10 Bit ADC