
FUJITSU LIMITED
PRELIMINARY and CONFIDENTIAL
MB86277 MINT
Graphics Controller
96
Specifications Rev. 1.0
DrawLine2i (Format7)
31
24 23
16 15
0
DrawLine2i
Command
Reserved
vertex
LFXs
0
LFYs
0
The
DrawLine2i command draws 2DLine with XY setup.
It starts drawing after setting parameters at
the 2DLine with XY setup drawing registers.
Integer data can only be used for coordinates.
Commands:
ZeroVector
Draws line from vertex 0 to vertex 1.
OneVector
Draws line from vertex 1 to vertex 0.
ZeroVectorNoEnd
Draws line from vertex 0 to vertex 1 (without drawing end
point).
OneVectorNoEnd
Draws line from vertex 1 to vertex 0 (without drawing end
point).
ZeroVectorBlpClear
Draws line from vertex 0 to vertex 1 (principal axis X, and
prior to drawing, broken line pattern reference position
cleared).
OneVectorBlpClear
Draws line from vertex 1 to vertex 0 (principal axis Y, and
prior to drawing, broken line pattern reference position
cleared).
ZeroVectorNoEndBlpClear
Draws line from vertex 0 to vertex 1 (principal axis X, without
end point drawing and prior to drawing, broken line pattern
reference position cleared).
OneVectorNoEndBlpClear
Draws line from vertex 1 to vertex 0 (principal axis Y, without
end point drawing and prior to drawing, broken line pattern
reference position cleared).
AntiZeroVector
Draws anti-alias line from vertex 0 to vertex 1.
AntiOneVector
Draws anti-alias line from vertex 1 to vertex 0.
AntiZeroVectorNoEnd
Draws anti-alias line from vertex 0 to vertex 1 (without end
point).
AntiOneVectorNoEnd
Draws anti-alias line from vertex 1 to vertex 0 (without end
point).
AntiZeroVectorBlpClear
Draws anti-alias line from vertex 0 to vertex 1 (principal axis
X and prior to drawing, broken line pattern reference position
cleared).
AntiOneVectorBlpClear
Draws anti-alias line from vertex 1 to vertex 0 (principal axis
Y and prior to drawing, broken line pattern reference position
cleared).
AntiZeroVectorNoEndBlpClear
Draws anti-alias line from vertex 0 to vertex 1 (principal axis
X, without end point drawing and prior to drawing, broken line
pattern reference position cleared).
AntiOneVectorNoEndBlpClear
Draws anti-alias line from vertex 1 to vertex 0 (principal axis
Y, without end point drawing and prior to drawing, broken line
pattern reference position cleared).