參數資料
型號: M66291GP
元件分類: 總線控制器
英文描述: UNIVERSAL SERIAL BUS CONTROLLER, PQFP48
封裝: 7 X 7 MM, 0.50 MM PITCH, PLASTIC, LQFP-48
文件頁數: 103/126頁
文件大?。?/td> 893K
代理商: M66291GP
M66291GP/HP
Rev 1.01 2004.11.01 page 78 of 122
(6) EPi_RWMD (Continuous Transmit/Receive Mode) Bit (b6)
This bit sets the transmit/receive mode at bulk transfer.
This bit can be set to “1” only when the transfer type is set to bulk transfer (EPi_TYP bits = “01”).
Set to “0” for other transfer modes.
When set to OUT buffer (EPi_DIR bit = “0”)
In case of single transmit/receive mode, the receive completes after receiving one packet under the
conditions as follows:
Receives the data equivalent to the size set by the EPi_MXPS bits.
Receives the short packet (including the zero-length packet).
In case of continuous transmit/receive mode, the receive completes after receiving several packets
under the conditions as follows:
Receives automatically the data equivalent to the size set by the EPi_MXPS bits several
times and receives the data equivalent to the byte set by the EPi_Buf_siz bit.
Receives the short packet (including the zero-length packet).
When the value set by the DMAn_Transaction Count Register conforms to the packet
receiving count.
When set to IN buffer (EPi_DIR bit = “1”)
In case of single transmit/receive mode, the transmit completes after transmitting one packet under
the conditions as follows:
Transmits the data equivalent to the size set by the EPi_MXPS bits or the zero-length
packet.
In case of continuous transmit/receive mode, the transmit completes after transmitting several packets
under the conditions as follows:
Transmits automatically the data equivalent to the size set by the EPi_MXPS bits several
times and transmits the data equivalent to the byte set by the EPi_Buf_siz bit.
In case of single transmit/receive mode, the write completes under the conditions as follows:
Writes the data equivalent to the size set by the EPi_MXPS bits to the buffer (IVAL bit
changed to “1”).
Writes “1” to the IVAL bit of the CPU_FIFO Control/Dn_FIFO Control Register.
In case of continuous transmit/receive mode, the write completes under the conditions as follows:
Writes the data equivalent to the size set by the EPi_Buf_siz bit to the buffer (IVAL bit
changed to “1”).
Writes “1” to the IVAL bit.
The set/clear conditions of the IVAL bit change according to this bit.
(7) EPi_Buf_Nmb (Buffer Start Number) Bits (b5~b0)
These bits set the beginning block number of the buffer.
The block number is a number by dividing the FIFO buffer into 64 byte sections (Note 1).
The domain set by the EPi_Buf_siz bit from the block set by these bits is secured as the buffer (Note 2).
Note 1: The M66291 is equipped with 3 Kbytes FIFO buffer and has the blocks from H’0 to H’2F.
Note 2: Make sure that several endpoints may not get overlapped in the same buffer area.
相關PDF資料
PDF描述
M66291GP UNIVERSAL SERIAL BUS CONTROLLER, PQFP48
M66596FP UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
M66596WG UNIVERSAL SERIAL BUS CONTROLLER, PBGA64
M6XXLFXI OTHER CLOCK GENERATOR, QCC16
M300LFXIT 50 MHz, OTHER CLOCK GENERATOR, QCC16
相關代理商/技術參數
參數描述
M66291GP#201 制造商:Renesas Electronics Corporation 功能描述:IC ASSP USB2.0 DEVICE CONTROLLER 48LQFP
M66291GP#RB0S 功能描述:IC USB CONTROLLER GEN-PUR 48LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A
M66291GPRB0S 制造商:Renesas Electronics Corporation 功能描述:USB2.0 Device Controller,LQFP48
M66291HP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:ASSP (USB2.0 Device Controller)
M66291HP#200D 功能描述:IC USB CONTROLLER GEN-PUR 52VQFN RoHS:否 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A