- 您現在的位置：買賣IC網 > PDF目錄1924 > IDT82P2828BHG (IDT, Integrated Device Technology Inc)IC LIU T1/J1/E1 28+1CH 640-PBGA PDF資料下載
參數資料
| 型號： | IDT82P2828BHG |
| 廠商： | IDT, Integrated Device Technology Inc |
| 文件頁數： | 79/154頁 |
| 文件大小： | 0K |
| 描述： | IC LIU T1/J1/E1 28+1CH 640-PBGA |
| 標準包裝： | 5 |
| 類型： | 線路接口裝置（LIU） |
| 規程： | E1 |
| 電源電壓： | 3.13 V ~ 3.47 V |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 640-BGA 裸露焊盤 |
| 供應商設備封裝： | 640-PBGA-EP（31x31） |
| 包裝： | 托盤 |
| 其它名稱： | 82P2828BHG |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁當前第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁第122頁第123頁第124頁第125頁第126頁第127頁第128頁第129頁第130頁第131頁第132頁第133頁第134頁第135頁第136頁第137頁第138頁第139頁第140頁第141頁第142頁第143頁第144頁第145頁第146頁第147頁第148頁第149頁第150頁第151頁第152頁第153頁第154頁
IDT82P2828
28(+1) CHANNEL HIGH-DENSITY T1/E1/J1 LINE INTERFACE UNIT
Functional Description
30
February 6, 2009
When RIM is low, only External Impedance Matching is supported for
all 29 receivers and the per-channel impedance matching configuration
bits - the R_TERM[2:0] bits (b2~0, RCF0,...) and the R120IN bit (b4,
RCF0,...) - are ignored.
When RIM is high, impedance matching is configured on a per-
channel basis. Three kinds of impedance matching are all supported
and selected by the R_TERM[2:0] bits (b2~0, RCF0,...) and the R120IN
bit (b4, RCF0,...). The R_TERM[2] bit (b2, RCF0,...) should be set to
match internal or external impedance. If the R_TERM[2] bit (b2,
RCF0,...) is ‘0’, internal impedance matching is enabled. The R120IN bit
(b4, RCF0,...) should be set to select Partially Internal Impedance
Matching or Fully Internal Impedance Matching. The internal program-
mable resistor (IM) is determined by the R_TERM[1:0] bits (b1~0,
RCF0,...). If the R_TERM[2] bit (b2, RCF0,...) is ‘1’, external impedance
matching is enabled. The configuration of the R120IN bit (b4, RCF0,...)
and the R_TERM[1:0] bits (b1~0, RCF0,...) is ignored.
A twisted pair cable can be connected with a 1:1 transformer or
without a transformer (transformer-less), while a coaxial cable must be
connected with a 1:1 transformer. Table 2 lists the recommended imped-
show the connection for one channel.
The transformer-less connection will offer a termination option with
reduced cost and board space. However, the waveform amplitude is not
standard compliant, and surge protection and common mode depres-
sion should be enhanced depending on equipment environment.
Figure-8 Receive Differential Line Interface with Twist-
ed Pair Cable (with transformer)
Figure-9 Receive Differential Line Interface with Coax-
ial Cable (with transformer)
Table-2 Impedance Matching Value in Receive Differential Mode
Cable Condition
Partially Internal Impedance Matching
(R120IN = 0) 1
Fully Internal Impedance Matching
(R120IN = 1) 1, 2
External Impedance Matching
R_TERM[2:0]
Rr
R_TERM[2:0]
Rr
R_TERM[2:0] 3
Rr
T1 100
twisted pair (with transformer)
000
120
000
(open)
1XX
100
J1 110
twisted pair (with transformer)
001
110
E1 120
twisted pair (with transformer)
010
120
E1 75
coaxial (with transformer)
011
75
T1 100
twisted pair (transformer-less4)
000
(not supported)
100
J1 110
twisted pair (transformer-less)
001
110
E1 120
twisted pair (transformer-less)
010
120
Note:
1. Partially Internal Impedance Matching and Fully Internal Impedance Matching are not supported when RIM is low.
2. Fully Internal Impedance Matching is not supported in transformer-less applications.
3. When RIM is low, the setting of the R_TERM[2:0] bits is ignored.
4. In transformer-less applications, the device should be protected against overvoltage. There are three important standards for overvoltage protection:
UL1950 and FCC Part 68;
Telcordia (Bellcore) GR-1089
ITU-T K.20, K.21 and K.41
1:1
Rr
RTIPn
RRINGn
IM
6.0 Vpp
1:1
Rr
RTIPn
RRINGn
IM
4.74 Vpp
相關PDF資料 |
PDF描述 |
|---|---|
| IDT82P2916BFG | IC LIU T1/E1/J1 16CH SH 484BGA |
| IDT82P5088BBG | IC LIU T1/E1/J1 OCTAL 256PBGA |
| IDT82V2041EPPG | IC LIU T1/J1/E1 1CH 44-TQFP |
| IDT82V2042EPFG | IC LIU T1/J1/E1 2CH SHORT 80TQFP |
| IDT82V2044EPFG | IC LIU T1/E1 QUAD SHORT 128-TQFP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| IDT82P2916 | 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:16-Channel High-Density T1/E1/J1 Line Interface Unit |
| IDT82P2916BFG | 功能描述:IC LIU T1/E1/J1 16CH SH 484BGA RoHS:是 類別:集成電路 (IC) >> 接口 - 電信 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS 產品變化通告:Product Discontinuation 06/Feb/2012 標準包裝:750 系列:* |
| IDT82P2916BFG8 | 制造商:Integrated Device Technology Inc 功能描述:IC LIU T1/E1/J1 16CH SH 484BGA |
| IDT82P5088 | 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:Universal Octal T1/E1/J1 LIU with Integrated Clock Adapter |
| IDT82P5088BBBLANK | 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:Universal Octal T1/E1/J1 LIU with Integrated Clock Adapter |
發布緊急采購，3分鐘左右您將得到回復。