參數資料
型號： DNC3X3625
廠商： Lineage Power
英文描述： Hex 10/100 Mbits/s Ethernet Transceiver Macrocell(六通道 10M位/秒和100 M位/秒以太網收發器宏單元)
中文描述： 六角10/100 Mbits /秒以太網收發器宏單元（六通道1000萬位/秒和100海里位/秒以太網收發器宏單元）
文件頁數： 25/32頁
文件大小： 464K
代理商： DNC3X3625
Advance Data Sheet
March 2000
DNC3X3625
10/100 Mbits/s Ethernet Transceiver Macrocell
25
4
Register Information
(continued)
Table 20. MR7—Next Page Transmit Register Bit Descriptions
* The format for the bit descriptions is as follows: the first number is the register number, the second number is the bit position in the register.
R = read, W = write.
Table 21. MR16—PCS Control Register Bit Descriptions
* The format for the bit descriptions is as follows: the first number is the register number, the second number is the bit position in the register.
R = read, W = write.
Bit
*
Type
R/W
Description
7.15 (NEXT_PAGE)
Next Page.
This bit indicates whether or not this is the last next page to be transmit-
ted. When this bit is 0, it indicates that this is the last page. When this bit is 1, it
indicates there is an additional next page.
Acknowledge.
This bit is the acknowledge bit from the link code word.
Message Page.
This bit is used to differentiate a message page from an unformat-
ted page. When this bit is 0, it indicates an unformatted page. When this bit is 1, it
indicates a formatted page.
Acknowledge 2.
This bit is used by the next page function to indicate that a device
has the ability to comply with the message. It is set as follows:
7.14 (ACK)
7.13 (MESSAGE)
R
R/W
7.12 (ACK2)
R/W
I
When this bit is 0, it indicates the device cannot comply with the message.
I
When this bit is 1, it indicates the device will comply with the message.
Toggle.
This bit is used by the arbitration function to ensure synchronization with
the link partner during next page exchange. This bit will always take the opposite
value of the toggle bit in the previously exchanged link code word:
7.11 (TOGGLE)
R
I
If the bit is a logic 0, the previous value of the transmitted link code word was a
logic 1.
I
If the bit is a 1, the previous value of the transmitted link code word was a 0.
The initial value of the toggle bit in the first next page transmitted is the inverse of
the value of bit 11 in the base link code word, and may assume a value of 1 or 0.
Message/Unformatted Code Field.
With these 11 bits, there are 2048 possible
messages. Message code field definitions are described in annex 28C of the IEEE
802.3u standard.
7.10:0 (MCF)
R/W
Bit
*
Type
R
R
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Description
16.15 (LOCKED)
16.14-12 (Reserved)
16.11 (ANA_RG21)
16.10 (LPWR_TUN)
16.9 (SMFIX_DA)
16.8 (EN_NOWR)
16.7-6 (ATST1:0)
16.5 (BYPPD125)
16.4 (BYPPD160)
16.3 (LOOPBACK)
Locked.
Locked pin from descrambler block.
Reserved.
Should be written as 0.
Analog Regiser 21.
Lucent Debug Register - Should be wrtten as 0.
Low Power Tuner.
Lucent Debug Register - Should be wrtten as 0.
State Machine Fix.
Lucent Debug Register - Should be written as 0.
Reserved.
Should be written as 0.
Autonegotiation Testmode (1:0).
Lucent Debug Register - Should be written 0
Bypass Powerdown 125.
OR’d with BYPPD125 Input
Bypass Powerdown 160.
OR’d with BYPPD160 Input
Loopback Configure.
When this bit is high, the entire loopback is performed in the
PCS macro. When this bit is low, only the collision pin is disabled in loopback.
Scan Test Mode
.
Force Loopback.
Force a loopback without forcing idle on the transmit side or dis-
abling the collision pin.
Speedup Counters.
Reduce link monitor counter to 10
μ
s from 620
μ
s. (Same as
FASTTEST = 1.)
16.2 (SCAN)
16.1 (FORCE
LOOPBACK)
16.0 (SPEEDUP
COUNTERS)
R/W
R/W
R/W
相關PDF資料
PDF描述
DNC3X3825 Octal 10/100 Mbits/s Ethernet Transceiver Macrocell(八通道10M位/秒和100 M位/秒以太網收發器宏單元)
DNC5X3125 Gigabit Ethernet Transceiver Macrocell(千兆位以太網收發器宏單元)
DNCM00 10 Mbit/s Ethernet MAC ASIC Macrocell(10 M位/秒以太網MAC ASIC宏單元)
DNCX01 ASIC
DNCX04 Telecommunication IC
相關代理商/技術參數
參數描述
DNC3X3825 制造商:AGERE 制造商全稱:AGERE 功能描述:Octal 10/100 Mbits/s Ethernet Transceiver Macrocell
DNC-4796 功能描述:電氣外殼配件 DIN RAIL MNT CLIP 50 x 14 x 8mm RoHS:否 制造商:Hammond Manufacturing 產品:Rack Accessories 類型: 面板寬度: 面板高度: 外部寬度: 外部高度: 外部深度: 顏色:Black
DNC550RE3O/M 制造商:Denon 功能描述:OWNER'S MANUAL
DNC550RO/M 制造商:Denon Electronics 功能描述:OWNER'S MANUAL DNC550R
DNC550RS/M 制造商:Denon Electronics 功能描述:SERVICE MANUAL
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*