
Data Sheet
ADV7342/ADV7343
Rev. | Page 57 of 108
ED/HD Sinc Compensation Filter Response
Subaddress 0x33, Bit 3
The ADV7342/ADV7343 include a filter designed to counter
the effect of sinc roll-off in DAC 1, DAC 2, and DAC 3 while
operating in ED/HD mode. This filter is enabled by default. It
can be disabled using Subaddress 0x33, Bit 3. The benefit of the
FREQUENCY (MHz)
0.5
–0.5
30
5
0
G
AI
N
(
d
B)
10
15
20
25
0.4
0.1
–0.2
–0.3
–0.4
0.3
0.2
0
–0.1
06399-
067
Figure 63. ED/HD Sinc Compensation Filter Enabled
FREQUENCY (MHz)
0.5
–0.5
30
5
0
G
AI
N
(
d
B)
10
15
20
25
0.4
0.1
–0.2
–0.3
–0.4
0.3
0.2
0
–0.1
06399-
068
Figure 64. ED/HD Sinc Compensation Filter Disabled
ED/HD TEST PATTERN COLOR CONTROLS
Subaddress 0x36 to Subaddress 0x38
Three 8-bit registers at Subaddress 0x36 to Subaddress 0x38
are used to program the output color of the internal ED/HD
test pattern generator (Subaddress 0x31, Bit 2 = 1), whether it
be the lines of the crosshatch pattern or the uniform field test
pattern. They are not functional as color controls for external
pixel data input.
The values for the luma (Y) and the color difference (Cr and
Cb) signals used to obtain white, black, and saturated primary
and complementary colors conform to the ITU-R BT.601-4
standard.
Table 45 shows sample color values that can be programmed
into the color registers when the output standard selection is set
to EIA 770.2/EIA 770.3 (Subaddress 0x30, Bits[1:0] = 00).
Table 45. Sample Color Values for EIA 770.2/EIA 770.3
ED/HD Output Standard Selection
Sample Color
Y Value
Cr Value
Cb Value
White
235
(0xEB)
128
(0x80)
128
(0x80)
Black
16
(0x10)
128
(0x80)
128
(0x80)
Red
81
(0x51)
240
(0xF0)
90
(0x5A)
Green
145
(0x91)
34
(0x22)
54
(0x36)
Blue
41
(0x29)
110
(0x6E)
240
(0xF0)
Yellow
210
(0xD2)
146
(0x92)
16
(0x10)
Cyan
170
(0xAA)
16
(0x10)
166
(0xA6)
Magenta
106
(0x6A)
222
(0xDE)
202
(0xCA)
COLOR SPACE CONVERSION MATRIX
Subaddress 0x03 to Subaddress 0x09
The internal color space conversion (CSC) matrix automatically
performs all color space conversions based on the input mode
programmed in the mode select register (Subaddress 0x01,
this matrix.
An SD color space conversion from RGB-in to YPrPb-out is
possible. An ED/HD color space conversion from RGB-in to
YPrPb-out is not possible.
Table 46. SD Color Space Conversion Options
Input
YPrPb/RGB Out
(Subaddress
0x02, Bit 5)
RGB In/YCrCb In
(Subaddress
0x87, Bit 7)
YCrCb
YPrPb
1
0
YCrCb
RGB
0
RGB
YPrPb
1
RGB
0
1
CVBS/YC outputs are available for all CSC combinations.
Table 47. ED/HD Color Space Conversion Options
Input
Output
YPrPb/RGB Out
(Subaddress
0x02, Bit 5)
RGB In/YCrCb In
(Subaddress
0x35, Bit 1)
YCrCb
YPrPb
1
0
YCrCb
RGB
0
RGB
0
1
SD Manual CSC Matrix Adjust Feature
The SD manual CSC matrix adjust feature provides custom
coefficient manipulation for RGB to YPbPr conversion (for
YPbPr to RGB conversion, this matrix adjustment is not
available).
Normally, there is no need to modify the SD matrix coefficients
because the CSC matrix automatically performs the color space
conversion based on the output color space selected (se
e Table 46).
Note that Bit 7 in Subaddress 0x87 must be set to enable RGB
input and, therefore, use the CSC manual adjustment.
D