
ADV7188
Rev. A | Page 54 of 112
VDP Manual Configuration
MAN_LINE_PGM, Enable Manual Line Programming of
VBI Standards, Address 0x64 [7], User Sub Map
The user can configure the VDP to decode different standards on
a line-to-line basis through manual line programming. For this,
the user must set the MAN_LINE_PGM bit and write to the
VBI_DATA_Px_Ny line programming bits (see Register 0x64
to Register 0x77 of the user sub map).
0 (default)—The VDP decodes default standards on lines as
1—The VBI standards to be decoded are manually
programmed.
VBI_DATA_Px_Ny [3:0], VBI Standard to be Decoded on
Line x for PAL, Line y for NTSC, Addresses 0x64 to 0x77,
User Sub Map
These bits are related 4-bit clusters in Register 0x64 to Register 0x77
of the user sub map. The 4-bit line-programming registers, named
VBI_DATA_Px_Ny, identify the VBI data standard that would be
decoded on Line x in PAL mode or on Line y in NTSC mode. The
different types of VBI standards decoded by VBI_DATA_Px_Ny
are shown in
Table 67. Note that the interpretation of its value
depends on whether the ADV7188 is in PAL or NTSC mode.
Notes
Full field detection (lines other than VBI lines) of
any standard can also be enabled by writing into the
VBI_DATA_P24_N22 [3:0] and VBI_DATA_P337_N285 [3:0]
bits. Therefore, if VBI_DATA_P24_N22 [3:0] is programmed
with any teletext standard, then teletext is decoded from
the entire odd field. The corresponding bits for the even
field are VBI_DATA_P337_N285 [3:0].
In teletext system identification, VDP assumes that if teletext
is present in a video channel, all the teletext lines comply with
a single standard system. Therefore, the line programming
using VBI_DATA_Px_Ny registers identifies whether the
data in line is teletext; the actual standard is identified
by the VDP_TTXT_TYPE_MAN bit. To program the
VDP_TTXT_TYPE_MAN bit, the VDP_TTXT_TYPE_
MAN_ENABLE bit must be set to 1.
Table 66. Default Line Standards for PAL and NTSC
PAL—625/50
NTSC—525/60
Line No.
Default VBI
Data Decoded
Line No.
Default VBI
Data Decoded
Line No.
Default VBI
Data Decoded
Line No.
Default VBI
Data Decoded
6
WST
318
VPS
23
Gemstar 1×
–
7
WST
319
WST
24
Gemstar 1×
286
Gemstar 1×
8
WST
320
WST
25
Gemstar 1×
287
Gemstar 1×
9
WST
321
WST
–
288
Gemstar 1×
10
WST
322
WST
–
11
WST
323
WST
–
12
WST
324
WST
10
NABTS
272
NABTS
13
WST
325
WST
11
NABTS
273
NABTS
14
WST
326
WST
12
NABTS
274
NABTS
15
WST
327
WST
13
NABTS
275
NABTS
16
VPS
328
WST
14
VITC
276
NABTS
17
–
329
VPS
15
NABTS
277
VITC
18
–
330
–
16
VITC
278
NABTS
19
VITC
331
–
17
NABTS
279
VITC
20
WST
332
VITC
18
NABTS
280
NABTS
21
WST
333
WST
19
NABTS
281
NABTS
22
CC
334
WST
20
CGMS
282
NABTS
23
WSS
335
CC
21
CC
283
CGMS
24 + full
odd field
WST
336
WST
22 + full
odd field
NABTS
284
CC
337 + full
even field
WST
285 + full
even field
NABTS