
ADV7188
Rev. A | Page 23 of 112
GLOBAL STATUS REGISTERS
Three registers provide summary information about the video
decoder: Status Register 1, Status Register 2, and Status Register 3.
These registers contain status bits that report operational information
to the user.
Status Register 1 [7:0], Address 0x10 [7:0]
This read-only register provides information about the internal
Depending on the setting of the FSCLE bit, the IN_LOCK [0] and
LOST_LOCK [1] bits of Status Register 1 are based solely on the
horizontal timing information or on the horizontal timing and
section.
AD_RESULT [2:0], Autodetection Result, Address 0x10 [6:4]
These bits report the findings from the autodetection block. For
more information on enabling the autodetection block, see the
Table 20. AD_RESULT Function
AD_RESULT [2:0]
Description
000
NTSC M/J
001
NTSC 443
010
PAL M
011
PAL 60
100
PAL B/G/H/I/D
101
SECAM
110
PAL Combination N
111
SECAM 525
Status Register 2 [7:0], Address 0x12 [7:0]
Status Register 3 [7:0], Address 0x13 [7:0]
Table 21. Status Register 1 Function
Status Register 1 [7:0]
Bit Name
Description
0
IN_LOCK
In lock (now)
1
LOST_LOCK
Lost lock (since last read of this register)
2
FSC_LOCK
FSC locked (now)
3
FOLLOW_PW
AGC follows peak white algorithm.
4
AD_RESULT.0
Result of autodetection.
5
AD_RESULT.1
Result of autodetection.
6
AD_RESULT.2
Result of autodetection.
7
COL_KILL
Color kill is active
Table 22. Status Register 2 Function
Status Register 2 [7:0]
Bit Name
Description
0
MVCS DET
Detected Macrovision color striping.
1
MVCS T3
Macrovision color striping protection. Conforms to Type 3 if high, Type 2 if low.
2
MV_PS DET
Detected Macrovision pseudosync pulses.
3
MV_AGC DET
Detected Macrovision AGC pulses.
4
LL_NSTD
Line length is nonstandard.
5
FSC_NSTD
FSC frequency is nonstandard
6
Reserved
7
Reserved
Table 23. Status Register 3 Function
Status Register 3 [7:0]
Bit Name
Description
0
INST_HLOCK
Horizontal lock indicator (instantaneous).
1
GEMD
Gemstar detect.
2
SD_OP_50HZ
Flags whether 50 Hz or 60 Hz is present at output.
3
CVBS
Indicates if a CVBS signal is detected in composite/S-video autodetection configuration
4
FREE_RUN_ACT
Indicates if the ADV7188 is in free-run mode. Outputs a blue screen by default. See the
about disabling this function.
5
STD_FLD_LEN
Field length is correct for currently selected video standard.
6
INTERLACED
Interlaced video detected (field sequence found).
7
PAL_SW_LOCK
Reliable sequence of swinging bursts detected.